Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
If your dryer is paused during a cycle, the indicator lights will blink until the Start/Pause button is pressed. 02 operating Digital Graphic Display 4 Dry Level Selection Button To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press the Dry Level button. An indicator light will illuminate next to the desired dryness level. Press the button repeatedly to scroll through the settings. Larger or bulkier loads may require the More Dry setting for complete dryness. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle. Use for items that lay flat or hang to dry. 5 Temp Selection Button To select the correct temperature for the load, press the Temp button. An indicator light will illuminate next to the desired temperature. Press the button repeatedly to scroll through the settings. High – For sturdy cottons or those labeled Tumble Dry. Medium – For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low – Provides the lowest heated dry temperature possible. 6 When using Manual Dry cycles, time can be adjusted by pressing the Time Time Selection Selection button. Button During the Sensory Dry cycle, the time light indicator is off because exact drying times are determined by fluctuating humidity levels. 7 Start/Pause Press to pause and restart programs. selection button 8 Press once to turn your dryer on, press again to turn it off. If your dryer is left Power button on for more than 10 minutes without any buttons being touched, the power automatically turns off. 9 10 Mixed load bell button This is an alarm that notifies the user when the average dry level is damp dry (80% dried). This is useful when the laundry contains various types of clothing you do not want to dry completely. An alarm sounds for five (5) seconds while continuing to perform the cycle. This function can only be selected in the Sensor Dry course, and the dry level can only be selected from among Normal Dry, More Dry. operating Instructions, tips _21 DV220AE-02810A-03_EN.indd 21 2010-06-28 .AEA 5:53:36 operating Instructions, tips CHILD LOCK A function to prevent children from playing with your dryer. Setting/Releasing If you want to set or release the Child Lock, press both the Temp. and Time buttons simultaneously for 3 seconds. How to Set: 1. It can be set while your dryer is running. 2. Once you set the Child Lock function, no button, except for the Power button, will respond until you release the Child Lock function. 3. The Child Lock indicator will be lit. 1. If the dryer is powered on again, the Child Lock function stays on. 2. To release that function, follow the instructions above. When other buttons, except for the Power button, do not respond, check the Child Lock indicator. 22_ operating Instructions, tips DV220AE-02810A-03_EN.indd 22 2010-06-28 .AEA 5:53:36 RACK DRY (OPTIONAL PART) Installing the drying rack 1. Open the Dryer door. 2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of the lint filter. 3. Place the rear legs in the two recessed areas of the dryer’s back wall, then push down the middle of the drying rack to fix. 4. Place the items to be dried on the rack, leaving space between them so air can circulate. 5. Close the Dryer door. 6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items. Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed. SUGGESTED ITEMS Washable sweaters (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fiberfilled) Stuffed toys (foam or rubber-filled) Foam rubber pillows Sneakers SUGGESTED TEMP. SETTINGS Low or Extra Low Low or Extra Low Air Fluff Air Fluff Air Fluff or Heat (Extra Low) 02 operating Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and WARNING lead to a fire hazard. Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it through a service center. (Part code : DC61-02773A) operating Instructions, tips _23 DV220AE-02810A-03_EN.indd 23 2010-06-28 .AEA 5:53:36 operating Instructions, tips CLEAN THE LINT FILTER • After each load. • To shorten drying time. • To operate more energy efficiently. Cleaning the Lint filter 1. Pull the case-filter out of the dryer. 2. Scrape the dust from the top part of the filter using your fingers. 3. Open the bottom cover and scrape the dust in the same way. 4. Shake off the dust, close the cover and install it in its place. When you re-insert the Filter-Case Filter, check the direction it is installed in. (Insert the Filter-Case so that the arrow faces the inside of the product.) Do not operate your dryer without the lint filter in place. CAUTION LOAD THE DRYER PROPERLY • Place only one washload in your dryer at a time. • Mixed loads o...
Эта инструкция также подходит к моделям:Сушильные машины - DV210 (4.82 mb)
Сушильные машины - DV210AE* (4.82 mb)