Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
When the massage starts Push the legrest with the sole of your foot while pulling the legrest slide lever. Armrest Insert your hand with fingers extended. 21 Overview of the Pre-Program and Quick Massage (Upper Body) Shiatsu Program (I) 1) Ultra knead/ Shiatsu/Grasp on Neck/Shoulder 2) Ultra knead/ Shiatsu on Back/ Lower back 3) Ultra knead/ Shiatsu/Grasp on Neck/Shoulder 4) Ultra knead/ Shiatsu on Back/ Lower back 5) Ultra knead/ Shiatsu/Grasp on Neck/Shoulder 6) Ultra knead/ Kneading on Back/Lower back 7) Finishing Touches Deep Program (II) 1) Ultra knead/ Kneading/Grasp of neck/Shoulder 2) Ultra knead/ Kneading of Back/Lower back 3) Ultra knead/ Kneading/Grasp of neck/Shoulder 4) Ultra knead/ Kneading of Back/Lower back 5) Ultra knead/ Kneading/Grasp of neck/Shoulder 6) Ultra knead/ Kneading of Lower back 7) Ultra knead/ Kneading/Grasp of Shoulder 8) Finishing Touches Swedish Program (III) 1) Ultra knead/ Swedish from Neck to Lower back 2) Swedish on Neck/Shoulder 3) Ultra knead/ Swedish on Back/Lower back 4) Swedish on Neck/Shoulder 5) Ultra knead/ Swedish on Back/Lower back 6) Swedish from Neck to Lower back 7) Finishing Touches Stretch Program (IV) 1) Kneading from Neck to Lower back 2) Narrow Pressing 3) Ultra knead from Neck to Lower back 4) Narrow Pressing/ Stretching 5) Ultra knead/ Pressing on Back/Lower back 6) Narrow Stretching 7) Swedish/ Stretching on Back/Lower back 8) Finishing Touches Quick Program (V) 1) Ultra knead/ Shiatsu/Grasp on Neck/Shoulder 2) Ultra knead/ Swedish on Back/Lower back 3) Finishing Touches 22 Creating Self-Programs Self-Program Self-Program The Self-Program allows you to create a massage where you determine the time and intensity in neck, shoulders, back, and lower back by selecting from levels 0 (no massage) to 3 (longest and most intense). 1 Press the button to turn on the power. The power will turn off automatically if no operation is executed for 3 minutes without performing massage. 2 Open the right cover and press the button. The self-program setting display on the top right of the display will flash. Display • 23 3 Set the time and intensity for the neck, shoulder, back, and lower back, respectively ( ). The level shifts sequentially whenever the button is pressed. Display How to shift the level Press the button to shift the levels for “NECK,” “SHOULDER,” “MIDDLE,” and “LOWER” by one up/down at the same time. 3 bars represents more time than one bar. If all areas are 3 bars, then both time will be equally long and the massage will be strong in all areas. If all areas are just one bar, then massage length will be the same, and intensity will be lighter. 4 Press the button to start the program. The massage will start after the body scanning. To change the time and intensity in the middle of a massage Set the condition again with Steps 3 and 4 . Press the button within approximately 30 seconds after resetting in Step 3 , otherwise the reset will be cancelled automatically. Setting the Time and Intensity In the Self-Program, the actions and time for the respective body parts will be set according to the settings picked by the user. Fewer bars means both less time and less strength. If you don’t want a massage at all in an area, set the bars to “0”. Massage Sequence The massage starts in the area with the highest numbers of bars selected, and moves successively from highest to lowest. If the levels of fatigue are the same, the massage will follow the sequence of “NECK,” “SHOULDER,” “MIDDLE,” and then “LOWER.” • • • Massage actions for the respective level of fatigue Stronger massage mainly Shiatsu Massage at an intermediate level, mainly Kneading Softer massage mainly Swedish No massage for this part During a massage To change off/on for “LEG/FOOT,” “SEAT,” “HAND/ARM,” or “SHOULDER” and adjust its intensity, see page 30. If you want to turn the stretch massage off/on, see page 34. If you want to adjust the legrest, see page 35 and 36. If you want to adjust the intensity and position of the massage on the upper body using the massage heads, see page 27 and 28. If you want to adjust the reclining angle, see page 35. If you want to use the “ULTRA KNEAD” function or “REPEAT” function, or change the massage style, see page 27. If you want to finish a massage, see page 42 and 43. • • • • • • • • • • • • • 24 Manual Selection Massages Manual Operation Manual Operation Manual Operation provides a massage of your favorite body part with your favorite action by selecting neck, shoulder, back, or lower back and an action. 1 Press the button to turn on the power. The power will turn off automatically if no operation is executed for 3 minutes without performing massage. 2 Open the right cover and press the button. The manual setting display on the top right of the display will flash. Display • 25 3 Select the location you want to massage ( ). You can select an action combined with “FULL ROLL” by pressing the button. Display 4 Select the massage action ( ). By pushing on the body...