Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit. Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number CONTENTS 1 GETTING STARTED INTRODUCTION 3 CAUTIONS 4 MAIN FEATURES 5 (Highlight) PART NAMES 6 (Highlight) OPERATION PANEL 7 COPIER INSTALLATION 8 (Highlight) CAUTIONS ON HANDLING 9 LOADING COPY PAPER 10 2 MAKING COPIES NORMAL COPYING 12 – Setting a large original 14 EXPOSURE ADJUSTMENT/PHOTO COPYING 14 REDUCTION/ENLARGEMENT/ZOOM 15 BYPASS FEED (including special paper) 16 TWO-SIDED COPYING 17 3 SPECIAL FUNCTIONS DESCRIPTION OF SPECIAL FUNCTIONS 19 TONER SAVE MODE 19 USER PROGRAMS (power save modes, auto clear time, stream feeding mode) 20 – Setting the power save modes and auto clear time 20 DISPLAYING TOTAL NUMBER OF COPIES 21 4 SUPPLIES AND USER MAINTENANCE (Highlight) TONER CARTRIDGE REPLACEMENT (Highlight) 22 (Highlight) – Toner cartridge life (Highlight) 24 USER MAINTENANCE 24 – Cabinet 24 – Original table and original cover 24 – Transfer charger 25 – When copier is not in use 25 1 (Text) CONTENTS 5 COPIER TROUBLE? MISFEED REMOVAL 26 – A Misfeed in the paper feed area 27 – B Misfeed in the fusing area 27 (Text) – C Misfeed in the transport area 28 (Highlight) DEVELOPER REQUIRED 29 MAINTENANCE REQUIRED 29 TROUBLESHOOTING 30 STATUS INDICATORS 31 AUTOMATIC EXPOSURE ADJUSTMENT 32 6 APPENDIX SPECIFICATIONS 33 SUPPLIES 34 – Types and sizes of copy paper 34 7 OPTIONAL EQUIPMENT SYSTEM CONFIGURATION 36 SINGLE PASS FEEDER (AR-SP3) 37 – Part names 37 – Specifications 37 – Using the SPF 37 – Stream feeding mode 38 – Misfeed in the SPF 38 250-SHEET PAPER FEED UNIT (AR-DE9) 40 – Part names 40 – Loading copy paper 40 – Misfeed removal 40 – Specifications 41 INDEX 2 GETTING STARTED GETTING STARTED This chapter provides basic information for using the copier. INTRODUCTION This copier has been designed to provide intuitive operating ease while requiring a minimum amount of space. To get full use of all copier features, be sure to familiarize yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location. 1 Getting started This copier can be used as a laser printer and as a facsimile machine by installing optional components. However, this manual describes only the copier features. For description of the printer features and facsimile features, see their separate manuals. Conventions used in this manual In this manual, the following icons are used to provide the user with information pertinent to the use of the copier. Warns the user that injury to the user or damage to the copier may result if the contents of the warning are not properly followed. Cautions the user that damage to the copier or one of its components may result if the contents of the caution are not properly followed. Notes provide information relevant to the copier regarding specifications, functions, performance, operation and such, that may be useful to the user. Indicates a letter displayed in the display. 3 1 Getting started CAUTIONS Follow the cautions below when using this copier. l The fusing area is hot. Exercise care in this area when removing misfed paper. l Do not look directly at the light source. Doing so may damage your eyes. l Do not switch the copier rapidly on and off. After turning the copier off, wait 10 to 15 seconds before turning it back on. l Copier power must be turned off before installing any supplies. l Place the copier on a firm, level surface. l Do not install the copier in a humid or dusty location. l When the copier is not used for a long time, for example, for consecutive holidays, turn the power switch off and remove the power cord from the outlet. l When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet. l Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the copier. l Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY PRECAUTIONS This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below. l Do not remove the cabinet, operation panel or any other covers. l The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. 4 MAIN FEATURES High-speed laser copying . Since warm-up time is zero, copying can be started immediately after the power switch is turned on. l First-copy time is only 9.6 seconds (normal mode). . Copying speed is 15 copies/min., which adapts to business use, allowing improvement of working efficiency. High-quality digital image l High-qua...