Оценок - 3, средний балл: 4 ( )

Производитель: Central Pneumatic Air Compressor Размер: 631.85 kb Название файла: 97521.pdf Язык инструкции:

Vibration Precautions This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. 2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. 3. Wear suitable gloves to reduce the vibration effects on the user. 4. Use tools with the lowest vibration when there is a choice between different processes. 5. Include vibration-free periods each day of work. 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUCTIONS. SPECIFICATIONS Operating Pressure 60-100 PSI Staple Capacity 80 Staple Length / Type 3/4” to 1-1/2”, 1/4” Crown, .039-.042” Shank (18 Gauge) Air Inlet 1/4” NPT (18 TPI - male/female adapter included) Note: SKU’s 40072 and 97521 contain the Stapler by itself. SKU 40073 contains the Stapler, pneumatic tool oil, 2 hex wrenches, and a blowmold carrying case. UNPACKING When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, call Harbor Freight Tools at 1-800-444-3353 as soon as possible. OPERATION For best service, incorporate an oiler, regulator, and inline filter, as shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight Tools. Quick CouplerRecommended Air Line ComponentsRegulator with Pressure GaugeQuick CouplerAir Hose on ReelValveFilterOilerCoupler PlugToolAir CompressorCoupler Plug Note: To connect this tool, we recommend a quick coupler/adapter (not included). Coupler/adapters are available at Harbor Freight Tools. For smoother operation, put 3-5 drops of pneumatic tool oil in the Air Plug (82) before each use. Testing the Single Sequential Safety Trip Mechanism Warning: Even though the Stapler should be empty during this procedure, ALWAYS point the Stapler at a piece of scrap wood when testing. 1. Make sure the tool is disconnected from the power supply. 2. Completely empty the magazine of staples. 3. The Stapler should not fire if the nose is not depressed against the workpiece. 4. Check that the Trigger (39) and the Safety (52) move freely, without sticking. 5. Connect the air supply to the tool at the Air Plug (82) set at the recommended 60-100 PSI, and not to go over the maximum 100 PSI. 6. Test the tool by depressing the Safety (52) against the workpiece without pulling the Trigger (39). The tool must not cycle (fire). If it cycles (fires), stop immediately and take the tool to a qualified service technician. 7. Hold the tool away or off of the workpiece. The Safety (52) of the tool should return to its original position. Squeeze the Trigger (39). The tool should not cycle (fire). If it cycles (fires), stop immediately and take the tool to a qualified service technician. 8. Depress the Safety (52) against the workpiece and squeeze the Trigger (39). The tool must cycle (fire) once only. Release the trigger and squeeze it again. The tool must cycle (fire) once only. REV 10a With the Trigger held, carefully lift the nailer and press it against the workpiece again. The tool must not cycle (fire). If it fails to act in the manner explained in bold, have it repaired by a qualified service technician. Loading Staples ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles. Warning! Make sure the Stapler is not attached to the air hose whenever loading the tool. 1. Release the Latch (69) and pull back on Magazine B (61). 2. Insert a row of clean, undamaged staples with the crowns up. 3. Push Magazine B (61) forward until the Latch (69) snaps into place. Operating the Stapler 1. Attach the Stapler to the air supply at the Air Plug (82). Start your compressor and check the pressure, making sure it is set at the recommended 60-100 PSI and not to go over the maximum 100 PSI. 2. To fire, place the nose of the Stapler on the workpiece. The Stapler should not fire if the nose is not depressed. Once depressed, gently and briefly squeeze the Trigger (39) once. Do not fire repeatedly. Staples could bounce off of one another, damaging the work pie...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: