Оценок - 2, средний балл: 4 ( )

Производитель: Harbor Freight Tools Размер: 870.26 kb Название файла: Язык инструкции:

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Specifications Item Description Magazine Angle Models 91054 & 92147: 34 Degrees Models 91053 & 92185: 28 Nail Size All Models: .113” to .131” Shank / 2” to 3-1/2” Long Clipped Head / 8 to 10 Gauge Nail Capacity (Quantity) All Models: 90 Per Load Operating PSI All Models: 75 PSI to 125 PSI * SCFM Required Models 91053 & 91054: 8 to 10 SCFM @ 90 PSI Model 92147: 12 to 14 SCFM @ 100 PSI Model 92185: 13 to 15 SCFM @ 100 PSI Trigger Type All Models: Full Sequential Safety Trip Accessories All Models: Carrying Case (Qty: 1) / Nails (Qty: 450). Hex Wrenches (Qty: 4) / Air Tool Oil (Qty. 1). Construction Models 91053 & 91054: Steel and Steel Alloy. Models 92147 & 92185: Magnesium / Steel. * The air pressure setting must not exceed job site regulations/restrictions. The air pressure setting must not exceed 90 PSI when being used with work pieces that have a thickness of less than 1-3/4”. Save This Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Do not expose to rain. Keep work area well lit. Do not use electrically powered tools in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. REV 11/06 Skus 91053, 91054 For technical questions, please call 1-800-444-3353. Page 2 92147, & 92185 8. 8. 5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. Use eye and ear protection. Always wear ANSI approved impact safety goggles and appropriate hearing protection. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Other people in the work area must also wear ANSI approved impact safety goggles. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handle must be kept clean, dry, and free from oil and grease at all times. Do not operate a tool if any portion of the tool’s operating controls are inoperable, disconnected, altered or not working properly. 10. Disconnect Air Hose and release any built-up air pressure. Never service the Nailer, clear jams, or disas...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: