Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked. Air leaking. 1. Loose screws in housing. 1. Tighten screws. 2. Damaged O-ring(s). 2. Replace O-ring(s). 3. Loose air fitting. 3. Tighten air fitting & use teflon tape. 4. Damaged housing gasket(s). 4. Replace gasket(s). Tool skips nails/ 1. Excessive air pressure. 1. Reduce air pressure to tool. staples while dis2. Air leaks. 2. Tighten screws and fittings. charging. 3. Dirt in nose. 4. Dirt or damage prevents nails /staples from moving freely in magazine. 5. Inadequate air flow to tool. 6. Worn O-ring on piston or lack of lubrication. 7. Damaged O-rings on trigger valve. 8. Worn bumper. 9. Cap seal leaking. 3. Clean nose. 4. Clean magazine and inspect/repair damage. 5. Check air fitting, hose, compressor & air pressure. 6. Replace piston O-ring. Lubricate. 7. Replace trigger valve O- rings. 8. Replace bumper. 9. Replace cap seal. Tool runs slowly or has a loss of power. 1. Undersized air hose. 2. Nailer is not lubricated. 3. Broken spring in cap assembly. 4. Exhaust port in cap is blocked. 5. Air pressure too low. 1. Use a larger air hose. 2. Lubricate tool. 3. Replace spring. 4. Clean or replace damaged internal parts. 5. Increase air pressure. Fasteners frequently jam the nailer/ stapler. 1. Nails/staples are the wrong size. 2. Nails/staples are bent or dirty. 3. Magazine or nose screws are loose. 4. Driver or driver guide are worn or damaged. 1. Use correct nails/staples. 2. Use undamaged, clean nails/staples. 3. Tighten magazine. 4. Replace worn or damaged parts. Tool does not fire. 1. Tool is not lubricated. 2. Nail/staple is jammed in magazine or discharge area. 3. Piston shaft is damaged. 4. Air pressure too low. 1. Lubricate tool. 2. Clear nail/staple from magazine or discharge area. 3. Replace piston shaft. 4. Check/increase air pressure. Model H8236 2-Piece Brad Nailer/Stapler Kit -17 WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom. We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products. To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue you a “Return Authorization Number,” which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise. The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty. Please feel free to write or call us if you have any questions about the machine or the manual. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: Thank you again for your business and continued support. We hope to serve you again soon! ...