10. At the end of each work session put the paint chips and debris in a double plastic bag, close it with tape or twist ties and dispose of properly. 11. Remove protective clothing and work shoes in the work area to avoid carrying dust into the rest of 3 Important Safety Instructions (cont’d) the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash hair and body thoroughly with soap and water. 12. WARNING: To reduce the risk of fir

Slower speed is compensated by the wider softened areas. Heat will also penetrate deeper. 2) As paint begins to blister and bubble, move gun slowly in a steady progression across the surface. Follow closely with a scraping knife (a 2-inch-wall scraper works best) to scrape the loosened paint. Preheat scraper as you are heating the paint surface. This increases the speed of paint stripping. a. Removal of paint by using heat is based on the fact that all organic paints soften at elevated temperatu

When using electrical tools, follow all precautions to reduce the risk of fire, electric shock, and other personal injury. 1-800-727-4023 Wagner Technical Service Or visit us on the world wide web! Need help? Call us first for answers fast. Call Wagner toll-free if you have any comments or problems with this Wagner product. 1770 Fernbrook Lane, Minneapolis, MN 55447 MHT Products, Inc. by Wagner Spray Tech 1770 Fernbrook Lane Plymouth, MN 55447 1-800-727-4023 56M8 0303 • Form No. 0283752E English

The peelings, residue and vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system damage; young and unborn children are particularly vulnerable. Before beginning any paint removal process you should determine whether the paint

Workplace safety.....................................................................................................Page 7 2. Electrical safety.........................................................................................................Page 7 3. Personal safety..........................................................................................................Page 8 4. Careful handling and use of electrical power tools ...............................................Page 8 Safet

Loose clothes, jewelry or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. Proper footi

Switching on the device: j Press the ON / OFF switch or “II“. 2 into setting “I“ Switching off the device: j Press the ON / OFF switch 2 into setting “0“. adjusting the air quantity and temperature: You can use the temperature and air quantity control 2 to set two different blower levels. It is therefore possible to select the appropriate quantity of air and temperature in accordance with the intended use: Setting I 300 l / min 350 °C Setting II 500 l / min 550 °C GB/IE/CY Operation / Cleaning U

! Ideal for removing paint in awkward corners, crevices, mouldings, beading or architraves. Concentrator nozzle G84 Glass protection nozzle -G89 ! Deflects the heat away from glass or other fragile areas. ! Ideal for windowsills, ledges, frames and skirting boards. Glass protection nozzle G89 Hook nozzle -G87 ! Disperses the heat flow evenly around the whole work surface. ! Ideal for defrosting frozen pipes, soldering pipe work, bending plastics or heat shrinking electrical insulating tubing. G8