Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for e. misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Use the power tool, accessories f. and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Service5. Have your power tool serviced by a a. qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Double Insulation: b. When servicing, use only identical replacement parts. Heat Gun Safety Warnings Hidden areas behind walls, ceilings, 1. floors, soffit boards, and other panels may contain flammable materials that could be ignited by the heat gun when working in these locations. The ignition of these materials may not be readily apparent and could result in property damage and injury to persons. When working in these locations, keep the heat gun moving in a back-and-forth motion. Lingering or pausing in one spot could ignite the panel or the material behind it. Extreme care should be taken when 2. stripping paint. The peelings, residue and vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead. Exposure to even low levels of lead can cause irreversible brain and nervous system damage; young and unborn children are particularly vulnerable. Before beginning any paint removal process you should determine whether the paint you are removing contains lead. This can be done by your local health department or by a professional who uses a paint analyzer to check the lead content of the paint to be removed. LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL AND SHOULD NOT BE REMOVED BY USING A HEAT GUN. Before beginning a paint removal process you should determine whether the paint you are removing contains lead. This can be done by your local health department or by a professional who uses a paint analyzer to check the lead content of the paint to be removed. Exercise CAUTION when using this 3. product outdoors. To reduce the risk of electric shock, keep extension cord connection dry and off the ground. Persons removing paint should follow 4. these guidelines: Move the work piece outdoors. If this • is not possible, keep the work area well ventilated. Open the windows and put an exhaust fan in one of them. Be sure the fan is moving the air from inside to outside. Remove or cover any carpets, rugs, • furniture, clothing, cooking utensils and air ducts. Place drop clothes in the work area to • catch any paint chips or peelings. Wear REV 10c protective clothing such as extra work shirts, overalls and hats. Work in one room at a time. • Furnishings should be removed or placed in the center of the room and covered. Work areas should be sealed off from the rest of the dwelling by sealed doorways with drop clothes. Children, pregnant or potentially • pregnant women, and nursing mothers should not be present in the work area until the work is done and all clean up is complete. Wear a dust respirator mask or a • dual filter (dust and fume) respirator mask which has been approved by the Occupational Safety and Health Administration (OSHA), the National Institute of Safety and Health (NIOSH), or the United States Bureau of Mines. These masks and replaceable filters are readily available at major hardware stores. Make sure the mask fits. Beards and facial hair may keep masks from sealing properly. Change filters often. DISPOSABLE PAPER MASKS ARE NOT ADEQUATE. Use caution when operating the Heat • Gun. Keep the Heat Gun moving, as excessive heat will generate fumes which can be inhaled by the operator. Keep food and drink out of the work • area. Wash hands, arms and face and rinse mouth before eating or drinking. Do not smoke or chew tobacco in the work area. Clean up all removed paint and dust • by wet mopping the floors. Use a wet cloth to clean all walls, sills and any other surface where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium phosphate (TSP) to wash and mop areas. At the end of each work session put • the paint chips and debris in a double plastic bag, close it with tape or twist ties and dispose of properly. Remove protective clothing and work • shoes in the work area to avoid carrying dust into the rest of the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash hair and body thoroughly with soap and water. When working with plas...
Эта инструкция также подходит к моделям:Строительные фены - 96289 (670.3 kb)