Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
. 3 DESCRIPTION OF THE MACHINE This washer is a domestic appliance capable of washing any type of fabric. ¦ The machine is constructed in sheet steel panels with a treated and painted finish that ensures its aesthetic quality remains unaltered over time. ¦ The motor and all moving parts have been designed and produced in a manner that guarantees minimum noise levels. ¦ The stainless steel drum is large and well mounted to ensure a better quality wash and a longer life of clothing. ¦ The control panel lets you use all the wash and dry programs with ease. ¦ The access door has a wide opening to facilitate easy loading and unloading of the washing. 23 1. Door 2. Stainless steel drum and barrell 3. Stove-enamelled power-coat paint 4. Four adjustable rubber-covered feet 5. Emergency drain and lint filter 1 4 5 SPECIFICATIONS: Supply voltage: Single-phase 115 V, 60 Hz, 15 Amp Inlet supply hose: Two 5-ft (1.5 m) fill hoses (hot and cold) Supply pressure: 15-142 PSI Outlet hose: 5.5 ft (1.7 m) polypropylene hose, 3/4” ID CAPACITY: Extra Large DIMENSIONS: A. Width 23-3/8” 59.37 cm B. Depth* 23-1/8” 58.74 cm C. Height 33-1/4” 84.45 cm * Depth w/door open: 38-3/4” (98.43 cm) B A C For additional information, see the type plate on the inner door facing. 5 INSTALLATION INSTRUCTIONS Read these instructions carefully and completely before you install the machine. The installation should be carried out by a qualified person who is familiar with all local codes and ordinances for electrical and plumbing connections. Incorrect installation may cause damage and/or injury. If the integrity of the machine is in doubt, do not use it. Call your dealer for qualified assistance. The machine can be installed anywhere provided that the temperature is not less than 38° F (3° C) and the electrical cords and hoses behind the machine are not cramped. To install the machine, follow the steps below: 1. Move the machine to its installation position and remove the outer wrapping and the polystyrene base. 2. For transport reasons, the drum is locked in position. Loosen the four locking bolts and remove them along with the plastic spacers (Fig. 1). NOTE: If the plastic spacers cannot be removed from the machine, open the side panel by loosening the screws indicated as “V” in Fig. 1. Remove the spacers and replace the panel. 3. Next, loosen the two locking screws (Z) and remove the two pins (U), as illustrated in Fig. 2. Keep the bolts, screws and pins for future use. 4. Plug the holes with the six plastic plugs packed inside the drum with the documentation (Fig. 3). 5. Level the machine by adjusting the feet by screwing or unscrewing as needed. Once the machine is level, tighten the locknuts (Fig. 4). V FIG. 1 FIG. 2 Z U FIG. 4 FIG. 3 ELECTRICAL CONNECTION ELECTRICAL CONNECTION Grounding Instructions This appliance must be grounded. In the case of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING! Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. If the power supply cord is damaged in any way please contact the dealer. Position the appliance so that the plug can be accessed and disconnected easily in case of emergencies. WATER SUPPLY CONNECTION Before making the water supply connection, allow a quantity of water to flow from the tap. The water should be clean and free from impurities, especially where the system is new or has been left unused for a length of time. There are two hoses provided with the machine. The hot water hose is indicated with a red stripe running the length of the hose. Insert the filter (washer) supplied (Fig. 5) before connecting the water inlet hose to the valve. Check that the other end of the hose is tight (Fig. 5A). Turn the supply valve on (Fig. 5B). ...
Эта инструкция также подходит к моделям:Стиральные машины - EWF272EL (687.77 kb)
Стиральные машины - EWF272EL (687.77 kb)
Стиральные машины - EWF272EL (687.77 kb)
Стиральные машины - EWF272EL (687.77 kb)