Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Installing the LPR (Line Printer Remote) Monitor Windows 98/Me 12 The LPR Port Name dialog box appears. Type the IP Address of the machine and "lp"as the queue name separated by a ":" Ex: 10.74.229.105:lp Click on the OK button. If an error occurs because the queue name was already used for the same IP Address, select a different unique name such as "lpr". The screen reverts to the Printer’s Properties. Check that the "Print to the following port:" was changed as entered, and click on the Apply button first and then on the OK button. The printer properties dialog box is closed and you have now configured the printer as a network printer. NOTE 1. The LPR Monitor is necessary to install your PC if printing a data via LAN. 21 Printer Section Installing the LPR (Line Printer Remote) Monitor Windows NT 4.0 Log in using an account with the administrator's right. 1 Click on the Start button, point to Settings, and click Control Panel. The Control Panel window appears. Double-click on the Network applet. The Network dialog box appears. 2 Click on the Services tab. Verify whether the LPR Service is already installed. (Indicated by Microsoft TCP/IP Printing shown in the Network Services list.) If it is already installed, skip over to Step 7. Otherwise continue installing the LPR Service. 3 Click on the button to display the Select Network Service dialog box, then select Microsoft TCP/IP Printing. Click on the button. Add... OK Installing the LPR (Line Printer Remote) Monitor Windows NT 4.0 4 The Windows NT Setup dialog box appears. Insert the Windows NT 4.0 CD-ROM, and type D:\i386 (where "D:" is your CD-ROM drive). Click on the button. Continue After the files are copied into your Hard Drive, the display returns to the Network dialog box. Confirm that the Microsoft TCP/IP Printing service was added to Network Services list. Click on the Close button. Note: Delete and Reinstall the Microsoft TCP/IP Printing if an error occurs, and the Microsoft TCP/IP Printing is displayed in the Network Services list, but, the OK button does not change into a Close button. The Network Settings Change dialog box is displayed, click on the Yes button to confirm whether to restart your computer now. You have now completed the LPR Service installation. After your computer is rebooted, click the Start button, point to Settings, and then click Printers. The Printers folder appears. Right-click on your desired printer (Ex. Panasonic DP-3000) and select Properties from the pop-up menu. 7 Continued on the next page... 23 Printer Section Installing the LPR (Line Printer Remote) Monitor Windows NT 4.0 8 The following step is to Register the LPR Port for network printing. Before proceeding, ensure that the Printer is installed, connected to the Network, is turned ON and operating properly. Select the Ports Tab and click on the button. Add Port... 9 9 The Printer Ports dialog box appears. Select LPR Port and click the button. New Port 10 The Add LPR compatible printer dialog box appears. Enter the IP Address of the Printer in the upper field, and "lp" for the print queue name in the lower field. Click on the OK button. (Please wait while the wizard verifies the IP Address and connectivity to the Network) Installing the LPR (Line Printer Remote) Monitor Windows NT 4.0 11 The Printer Ports dialog box appears. Click on the button. Close Select the printer port and click the button. OK The printer properties dialog box is closed and you have now configured the printer as a network printer. 25 Printer Section Installing the LPR (Line Printer Remote) Monitor Windows 2000/XP 1 Log in using an account with the administrator's right. Open the Printers folder. Right-click on your desired printer (Ex. Panasonic DP-3000) and select Properties from the pop-up menu. The printer properties dialog box appears. 2 Select the Ports Add Port... Tab and click on the button. Installing the LPR (Line Printer Remote) Monitor Windows 2000/XP 3 Select Standard TCP/IP Port and click the button. 4 Click on the button. 5 Enter the IP Address and the Port Name and click the button. Note: The Port Name is automatically entered by Windows 2000/XP. You may change this as required. New Port ... Next Next Continued on the next page... 27 Printer Section Installing the LPR (Line Printer Remote) Monitor Windows 2000/XP 6 Select Custom and click the button. Settings... 7 7 1. Under the Protocol, select LPR. 2. Under the LPR Settings, enter the Queue Name (Ex. LPR1) and check the LPR Byte Counting Enabled. 3. Click on the OK button. 8 Click on the button. Click on the button. The printer properties dialog box is closed and you have now configured the printer as a network printer. Next OK Installing the LPR (Line Printer Remote) Monitor Windows 2000/XP 9 Click on the button. 10 Click on the button. Finish Close 11 Click on the button. Click on the button. The printer properties dialog box is closed and you have now configured the printer as a network printer. Apply OK 29 Printer Secti...