Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• Alarm code indicating a fault in the machine operation (see page 38). Programme progress display . By selecting the wash programme, the pilot lights corre sponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on. . ! . Cancelling a programme To cancel a programme which is running, turn the programme selector dial to the RESET position. Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to RESET and then to the DRAIN or SPIN programme. Description of the appliance Altering an option/programme which is running To alter an option, first set the machine to PAUSE by pressing the START/PAUSE button. Any option can be modified before the machine starts it. After selecting the new option press the START/PAUSE button again to re-start the selected programme. To modify the selected programme turn the programme selector dial to RESET and then choose a new programme. After pressing the START/PAUSE button again, the machine restarts with the newly selected programme and the water is not emptied out. Opening the door after the programme has started You can open the door, after having set the machine to PAUSE, provided the following conditions exist: • the machine is not in the heating or drying phase beyond 55°C; • the level of the water is not high; • the drum is not turning. If these requirements are met, when you pause the machine the door can be opened. Should it not be possible to open the door, and should it be absolutely nec essary to do so, switch the machine off by pressing the ON/OFF button. After approximately 3 minutes, you can open the door. Pay attention to the level and temperature of the water in the machine! When you close the door and press the ON/OFF and START/PAUSE buttons again, the washing machine will resume the programme from the point where it had been interrupted. Description of the appliance Detergent dispenser drawer . Compartment for prewash or soak detergent and stain remover. The prewash or soak detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main wash. It is emptied at the beginning of the wash cycle. Compartment for liquid additives (fabric softener, starch). It is emptied at the last rinse. The quantity of additives must not exceed the “MAX” mark in the drawer. Before the first wash Before your first wash, we recommend that you run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. Preparing the wash cycle Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons. • Turn double faced items inside out (sleeping bags, anoraks, etc.) • Turn coloured knitted fabrics, woollens and fabrics with trim inside out. • Wash small and delicate items (baby socks, tights) inside a laundry net or in a pillow case closed with a zip, or in larger socks. • Treat curtains with special care. Remove all metal or plastic hooks or put them in a net or a bag. We decline any responsibility in case of damage. • Whites and coloureds must be washed separately: white items can loose their whiteness. • New coloured fabrics often have excess dyes; it is advisable to wash them separately for the first time. • Wash small and large items together; this improves the washing result and the laundry is better distributed during spinning. • Shake out garments before putting them into the machine. • Insert each garment separately. Preparing the wash cycle Weight of laundry Sort of laundry Approximate dry weights Bathrobes 1200 g Work shirts 300-600 g Quilt covers 700 g Sheets 500 g Blouses 100 g Hand towels 200 g Tea towels 100 g Shirts 200 g Pillowcases 200 g Night-gowns/Pyjamas 200-250 g Tablecloths 200-300 g Underwear 250 g Types of fabric and care labels The labels on garments help you to select the most suitable wash programme. The laundry should be sorted out according to the type of fabric and the instructions indicated on care labels. Temperatures indicated on labels are always maximum temperatures. Cotton Linen and cottons marked with this symbol can be washed at high temperatures. Cotton Linen and cottons marked with this symbol are colourfast and can be washed at 60°C. Cotton Garments marked with these symbols have delicate colours, therefore the washing temperature must not exceed these valu...
Эта инструкция также подходит к моделям:Стиральные машины - LAVAMAT TURBO 12710 VIT, 14710 VIT (704.77 kb)