Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Install two "AA" (penlight size) batteries. 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged; they can overheat and 3. Replace the battery compartment cover. rupture. (Follow battery manufacturer's directions.) POWER SOURCE TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. AC outlet NOTES: 1. Never connect the AC line cord plug to other than Wider Hole the specified voltage (120V 60Hz). Use the attached and Blade power cord only. 2. If the polarized AC cord does not fit into a non- polarized AC outlet, do not attempt to file or cut the blade. It is the user's responsibility to have an electrician replace the obsolete outlet. 3. If you cause a static discharge when touching the unit, and the unit fails to function, simply unplug the unit from the AC outlet, wait a few minutes, and plug Polarized AC Cord Plug it back in. The unit should return to normal operation. (One blade is wider than the other) 1 2 7 3 4 8 5 6 9 Remote control Part No. EUR7713020 (13R18B/13R38S), EUR7713030 (13R28W). CH VOL VOL CH RECALL TV/VIDEOMUTE R-TUNE POWER 1. POWER -Press to turn the TV on. Press again to turn the TV off. 2. ACTION -Press to display the On-screen menu function. And also, press to enter or select information for On-Screen operations. 3. VOL (VOLUME) / -Press to increase, or to decrease the volume level. And also, press to select the desired setting during On-Screen operations. 4. MUTE -To turn off the sound, press this button once. The TV will be silenced and the symbol "MUTE" will appear on the screen. The muting feature can be released by pressing MUTE again or one of the VOL or . 5. Direct Channel Selection (0-9) -Allows direct access to any channel. 6. R-TUNE -This button allows you to go back to the previous channel selected by just pressing R-TUNE. Press this button again to return to the channel you were watching. 7. CH (CHANNEL) / -Press to change to a higher numbered channel set into memory. Press to change to a lower numbered channel set into memory. And also, press to select the desired setting during On-Screen operations. 8. TV/VIDEO -Switches between TV and external input. 9. RECALL -When you press this button, the channel number will appear in the upper right corner of the screen. Press the button again to remove display from the screen. LOCATION OF CONTROLS EPJ POWER VOLUME ACTION CHANNEL VIDEO IN AUDIO IN 412 3 5 6 1. EPJ (Earphone) Jack -Plug an earphone or monaural headphones with an 1/8 miniplug into this jack for private listening. 2. Remote Sensor -Signals from the Remote Control unit are received here. 3. POWER -Press to turn the TV on or off. 4. VOLUME / -Press to raise or lower the level of the sound. And also, press to select the desired setting during On-Screen operations. ACTION -Press to display the On-screen menu function. And also, press to enter or select information for On-Screen operations. 5. CHANNEL s / t -Press to select a higher or lower numbered channel set into memory. And also, press to select the desired setting during On-Screen operations. 6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be connected here. NOTE: If needed customer can enter the OSD by pressing VOLUME and of the front panel at the same time. SETTING LANGUAGE This TV can display the channel number, on screen displays and picture adjustments on the screen in English, Spanish or French. 1 Press ACTION. to select the SET UP mode, then press ACTION. All four arrows can be used to select the SET UP mode, not just To turn on the TV, press POWER. The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) or . The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As the sound level increases, so do the number of BARS AND THE NUMBER on thescreen. The same is true for decreasing the level. Set the TV/CATV menu option to the appropriate position. When shipped from the34Press Press3 2 NOTE: . and then press s or t to select desired language (e.g. English), then press ACTION. Press ACTION to select the EXIT mode, then press ACTION again. SETUPLANGUAGE/IDIOMA/LANGUEMODEAUTOPROGRAMMANUALPROGRAMCC/ACTION:CABLE:OFF//PICTURELOCKEXITTIMERSETUP LANGUAGE/IDIOMA/LANGUE ENGLISH ESPANOL FRANCAIS /ACTION / NOTE: If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selec...
Эта инструкция также подходит к моделям:Телевизоры - CT 13R28W (110.48 kb)
Телевизоры - CT 13R38S (110.48 kb)