Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Repeatedly press the Option button to select the cycle you prefer (Prewash, Rinse+, Rinse hold, ... ) 10. Press the Temperature button to select the temperature (cold water , 40.C, 60.C, 95.C). 11. Press the Start/Pause button and the machine will begin the cycle. When the cycle is finished: 1. Open the door. Note: The door will not open until 3 minutes after the machine stops or the power turns off. 2. Remove laundry. 6 Washing a Load of Laundry Selecting options Prewash Prewash is only available when washing cotton, colour, synthetics, delicate clothes. To use prewash: 1. Load the prewash detergent into compartment of the detergent drawer. 2. Select "Cotton" with the Program select button. 3. Press the Option button until the "Prewash" indicator lights up on the control panel. 4. Press Start/Pause to begin the cycle. Rinse+ Your machine will run through an additional rinsing cycle. The washing duration will be prolonged accordingly. Rinse Hold The laundry remains soaking in the final rinse water. Before the laundry can be unloaded, the "Spin" program must be run. Washing tips and hints Sorting your laundry: Sort your laundry according to the following characteristics: • Type of fabric care label symbol: Sort laundry into cottons, mixed fibers, synthetics, silks, wools and rayon. • Colour: Divide whites and colours. Wash new, coloured items separately. • Size: Placing items of different sizes in the same load will improve the washing action. • Sensitivity: Wash delicate items separately, using the Delicate wash program for pure new wool, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix. Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine drum, and the water tank. Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should be tied together. Determining load capacity: Do not overload the washing machine or your laundry may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing. Fabfi c Type Load Capacity J1453 (V/S) / J1253 (V/S) / J1053 (V/S) / J853 (V/S) Colour/cotton -average/lightly soiled 7.0 kg -heavily soiled 7.0 kg Synthetic 4.0 kg Delicate 2.5 kg Wool 2.0 kg Quick 4.0 kg Detergent tips: The type of detergent you should use is based on the type of fabric (Cotton, Synthetic, Delicate items) colour, wash temperature, degree and type of soiling. Always use "low suds" laundry soap, which is designed for automatic washing machines. When determining the detergent quantity, it’s necessary to consider recommendations of the detergent manufacturer, indicated on the package, as well as weight, type of laundry, it’s fouling factor and water hardness in your region. Note: Keep detergents and additives in a safe, dry place out of the reach of children. 7 Maintaining the Washing Machine Repairing a frozen washing machine If the temperature drops below freezing and your washing machine is frozen: 1. Unplug the washing machine. 2. Pour warm water on the source faucet to loosen the water supply hose. 3. Remove the water supply hose and soak it in warm water. 4. Pour warm water into the washing machine drum and let it sit for 10 minutes. 5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal. Cleaning the exterior 1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive household detergents. 2. Use a soft cloth to dry the surfaces. 3. Do not pour water on the washing machine. Cleaning the debris filter Clean the debris filter 2 or 3 times a year. 1. Remove the base cover from the front of the washing machine. 2. Unscrew the filter cap and take it out. 3. Wash any dirt or other material from the filter. Make sure the drain pump propeller behind the filter is not blocked. Replace the filter cap. 4. Replace the base cover. Cleaning the water hose mesh filter You should clean the water hose mesh filter at least one time per year, or when the lamps on your machine flickers: To do this: 1. Turn off the water source to the washing machine. 2. Unscrew the hose from the back of the washing machine. 3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector. 4. Push the filter back into place. 5. Screw the hose back onto the washing machine. 6. Turn on the faucet and make sure the connections are watertight. 8 Troubleshooting Problems and solutions The washing machine will not start • Make sure the door is firmly closed. • Make sure the washing machine is plugged in. • Make sure the water source faucet is turned on. • Make sure to press the Start/Pause button. No water or insufficient water supply • Make sure the water source faucet is turned on. • Make sure the water source hose is not frozen. • Make s...
Эта инструкция также подходит к моделям:Стиральные машины - J1053 (258.18 kb)
Стиральные машины - J1253 (258.18 kb)
Стиральные машины - J1253S (258.18 kb)
Стиральные машины - J1453 (258.18 kb)