Оценок - 2, средний балл: 4 ( )

Производитель: Beko Размер: 670.15 kb Название файла: Язык инструкции:

• While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding. • To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out. Intended use • This product has been designed for home use. • The appliance may only be used for washing and rinsing of textiles that are marked accordingly. • Only detergents, softeners and supplements suitable for washing machines may be used. • Observe the care instructions labeled on textile products and any other instructions given by companies that produce detergents for your machine. Safety instructions • This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. • The supply and draining hoses must always be securely fastened and remain in an undamaged state. • Fit the draining hose to a washbasin or bathtub securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the loading door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water. • Never force to open the locked loading door! The loading door will be ready to open just a few minutes after the washing cycle comes to an end. • Unplug the machine when it is not in use. • Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning. • Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged. • Never attempt to repair the machine yourself. Otherwise, you may be putting yours and other's lives in danger. • For malfunctions that cannot be solved by information in the operating manual: Turn off the machine, unplug it, turn off the water tap and contact an authorized service agent. If there are children in your house... • Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine. • Close the loading door when you leave the area where the machine is located. • Store all detergents in a safe place out of reach of the children. 3 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all the bolts with a spanner until they rotate freely (“C”) 2. Remove transportation safety bolts by turning them gently. 3. Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”) C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. C Never move the appliance without the transportation safety bolts properly fixed in place! Appropriate installation location Install the appliance in environments which have no risk of freezing, in a stable and level position. C The floor must be capable of carrying the load on it! C If the washing machine and a drier are placed on top of each other, their approximate weight together may reach 180 kg when they are full. Important: • Do not place the appliance on top of the power cable. • Keep at least 1cm distance from the edges of other furniture. • Place the machine on a firm surface; do not position it on a long pile rug or suchlike surfaces. Adjusting the feet C Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1. Manually (by hand) loosen the lock nuts on the feet. 2. Adjust them until the machine stands level and firmly. 3. Important: Tighten all lock nuts up again. Connecting to the water supply. Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 10 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run smoothly.) Attach a pressure- reducing valve if the water pressure is higher. • Connect the special hoses supplied with the machine to the water intake valves on the machine. The hose bearing the “red” sign (90°C max) is the hot water inlet and the hose bearing the “blue” sign (25°C max) is for the cold water inlet. • In order to prevent water leakage that may occur at the connection points, there are rubber seals (4 seals for the models with double water inlet and 2 seals for other models) attached to the hoses. These seals should be us...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: