Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Be sure to press the TV button before operating your TV. TV Move to position TV to put the remote control in TV mode. LED will blink when other buttons are pressed while in TV mode. TV INPUT Switch through TV inputs (if applicable). VOL +/ Increases and decreases volume. MUTE Switches audio on and off 0-9 Allows direct number entry for tuning to a channel. Note: All features on your TV may not be supported by this remote. TV POWER ON Press to turn TV on. TV POWER OFF Press to turn TV off. CH+/CH- Change channel up or down 16 Setup Wizard If your equipment has been professionally installed, skip this first time setup section and go to page 18. After the DIRECTV® Receiver has been connected to your components, it is time to turn the DIRECTV Receiver on. 1. Press the PWR button on the remote control. 2. Use the 89 buttons to select your preferred language of the on screen menus and guide and press SELECT. 3. When the Welcome screen displays, press the SELECT button on the remote control to start the Setup Wizard.The Setup Wizard is a first time setup that automatically steps you through the installation process.This screen will ONLY appear the very first time your DIRECTV Receiver is turned on. a. Enter the ZIP code. Note: The ZIP code is critical to point your dish accurately (refer to page 30). b. Configure the dish (refer to page 30). c. Point the dish (refer to page 30). d. Test the System (refer to page 31). 4. After you have installed your DIRECTV System, you should contact DIRECTV to order DIRECTV® programming at 1-800 DIRECTV (1-800-347-3288). 17 Watching TV The Info Banner shows information on the currently tuned program such as the rating, title, start and end time, program description, and channel number. It also displays the current time and date and indicates if any special features are currently enabled, such as Favorite Channels (page 19). All Day Ticket (Pay Per View) Letterbox format Alternate Audio Track System Locked Closed Captioning System Temporarily Unlocked New Incoming Messages Pay Per View Number & Name Start/End Time & Date Channel Icon Program Name & Description Rating Current Time & Date Current Alternate Audio Track -The alternate audio icon indicates an alternate audio track is available. To change audio tracks, press the ; or : button on the remote. Favorites (page 19) status On screen Display (OSD) message space indicates error messages or status or song ID information (when you select a channel that contains audio only). Watching TV To do this…. Do this…. Display the banner Press INFO button on the remote View program details 1. Press INFO to display the banner 2. Press INFO again to display program details View other channels with You can see or “browse” what is on other channels without tuning away from the the Browse Banner currently viewed program with the Browse Banner. 1. While watching a program, press the INFO button on the remote to display the banner. 2. While the banner is displayed. press the ,9 buttons to see what is showing on other channels. 3. Press SELECT to switch to the new channel displayed in the Banner or exit to remove the banner. Note: When Favorite Channels (page 19) is in use, the Browse Banner will only show programs from those lists. 18 Enhanced User Features (cont’d) Favorite Channels Favorite Channels is an easy way to customize the listing of channels. Once Favorites is configured, the Favorites icon displays in the banner and programs displayed in the Program Guide are only those in the selected list. When using the CH+ and CH- buttons, you are limited to channels in the Favorites list; however, you can access any channel by entering its number directly on the remote control. You can save up to four different favorite channel lists.This way, members of a household can each set their own favorite channel list. To access Favorite Channels: 1. Press MENU. 2. Use the 9 button to select “Preferences” and press SELECT. 3. Use the 9 button to select “Set Favorite Channels” and press SELECT. Then, to select or edit a Favorite channel list: 1. Press the ,9 buttons to highlight the desired list, and press SELECT. To turn off any previously selected Favorites list, highlight “All Channels”, and press SELECT 2. Then,use the ,9 buttons to highlight “Select” to activate your Favorite list and press SELECT.To edit the name or customize a Favorite channel list, select “Select and Edit” and press SELECT. Select & Edit: Change List Name: 1. Select “Change List Name” and press SELECT. 2. Use the ;:,9 buttons to scroll through the alphabet.When the letter you want is selected, press SELECT. Repeat until you have spelled the list name. 3. When finished, select “Done” on the on-screen keyboard and press SELECT. Select & Edit: Customize Favorites: 1. Select “Customize Favorites” and press SELECT. 2. You can manually select/deselect channels by highlighting a channel and pressing SELECT. Use the ,9 buttons to navigate through the list, or use the PAGE +/- buttons to sc...