Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Interface icons SIM1_Signal strength SIM2_Signal strength Missed call Headset Alarm clock set Silent Outdoor General * Battery status Meeting * SIM1_New SMS SIM2_New SMS * Battery The lithium ion battery of the mobile phone can be immediately used after unpacking. Installing and removing the battery 1. Make sure that your phone is off and remove the battery cover. 2. Insert the battery by aligning the metal contacts with the contacts in the battery slot. And then push down the upper section of the battery until it clicks into place. To remove the battery, pull it up and remove it from the mobile phone. 3. Replace the battery cover and close it gently until you hear a click. Remove the battery cover Push down the battery Replace the battery cover Push up the battery from here Inserting the SIM/SD card Insert the SIM card and memory card as follows: 1. Make sure that the phone is switched off and the charger is disconnected from the phone. 2. Turn the phone over and remove the battery cover. 3. Remove the battery if it is already installed. 4. Hold your SIM card with the cut corner oriented as shown and then slide it into the card holder with the metal contacts facing downward. SIM card (Subscriber Identity Module) is a micro-chip that holds your personal information such as names and phone numbers. Your phone won’t work without it. If you already have contacts on your SIM card, they can be transferred in most cases. 5. Insert the memory card with the metal contacts facing down until it clicks to the right position. Insert the memory card 6. Replace the battery first. 7. Replace the battery cover. Note: You can use a memory card to expand the storage of the phone. You can store or copy files such as videos, photos, music, and so on. Do not take out the card or switch off the phone while transmitting or saving data, which may cause data loss or damage to the phone/card. Charging the battery Your phone is powered by a rechargeable battery. For maximum battery performance, it is recommended that you first use up the battery power and then charge it completely. A new battery’s full performance is achieved only after three complete charge and discharge cycles. 1. Connect your travel adapter to the right of your mobile phone as shown in the diagram. 2. Connect the other end of the travel adapter to the mains socket. 3. When the battery is fully charged, disconnect the charger. Powering your phone on/off Make sure that your SIM card is in your mobile phone and that the battery is charged. Hold the End/Power key to power on/off the phone. The phone will automatically search for the network when switched on. Writing text . Text Mode Your mobile phone provides the following input methods: alphabetic (Smart abc abc Smart ABC ABC) mode and Numeric (123) mode. The current input mode is displayed on the screen above the inp...