Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To switch to ActiveSync on your Pocket PC, tap , and then tap ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help. To learn more about the Pocket PC ActiveSync, switch to ActiveSync and tap and then Help. Just refer to the Help for more information. After the synchronization is completed, tap Calendar, Contacts, and Tasks on the Pocket PC to view if the information saved in Microsoft Outlook on the personal computer is already copied to the Pocket PC. .. On the Pocket PC site: Tap , Programs and then • ActiveSync. .. View synchronization status. .. View connection status. • .. Tap to connect and synchronize. • .. Tap to synchronize via • Bluetooth or change synchronization settings. English English English 6-10 Synchronizing using Bluetooth Without using the USB cable to connect the two devices, you can still synchronize using Bluetooth. The greatest advantage is that you don’t have to plug in and detach from the USB cable so often. This is especially useful for managing several Pocket PCs. For details on Bluetooth devices, refer to “Using Bluetooth” section. FAQ About Synchronization Tap , Settings, the Connections tab, and then USB to PC. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left. GPS 7-1 7 77 G GGP PPS SS • // The GPS signal receiver is built into the Pocket PC. If car windscreen has heat reflective metallic film, or Pocket PC is obstructed by objects, then the receptivity of the GPS will be adversely affected. GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1. Please set navigation destination before driving. Do not operate this system while driving. 2. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. English English English 7-2 3. GPS positioning is limited by weather and usage location (tall buildings, tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content. Please install GPS outdoors with clear line of sight. Beneath the windscreen at the front of the car is a common choice, and the windscreen should be free of heat reflective film. 4. The GPS system is built and operated by the U.S. Department of Defense which is also responsible for its maintenance and calibration. Any changes made by them may affect the operation and accuracy of the GPS system. 5. Wireless devices (mobile phones, speed radar detectors) will all interfere with the satellite signal and cause unreliable signal reception. 6. The GPS position fix is provided only for the driver’s reference and should not affect actual driver behavior. 7. The electronic map data provided in the navigation system is for normal reference only and not intended for high precision applications. The user should determine their exact location based on actual road conditions. 8. The route provided by the navigation system, the audio cues and intersection data are derived from recommended optimal route calculated using the electronic map data. This is provided for the driver’s reference only, the driver should decide their chosen route according to actual road conditions. 9. When not in use, please do not leave the device inside the car. If exposed directly to sunlight, the battery may overheat and cause damage to this device. This may endanger the vehicle as well. GPS 7-3 Satellite Data Update (Not supported in USA) Tap , Programs, GPS, and then Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook). Please note that your PC must be online. 2. Wireless LAN connection. 3. GPRS connection: Roaming mode cannot update GPS data automatically. If necessary, change to manual mode. .. The system will update GPS data automatically based on a • schedule. Follow these steps: • .. Check the automatic update checkbox. • .. Set the date. .. Set the time. .. The text shows the expiration • date of the GPS data. On the due date, the system will pop up a warning message. Refer to the following instruction about the Today screen. English English English 7-4 .. Tap the Do...