Оценок - 2, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You do not need to type “at the front of each URL as the WAP Browser will automatically add it. -Display images [8-3-1-2-2] You can select whether images on WAP cards are displayed or not. ENGLISH 81 Internet [Menu 8] Accessing the Menu -Conn. type [8-3-1-2-3] The options for connection type are Temporary or Continuous and depend on the gateway you are using. Continuous [8-3-1-2-3-1] A confirmed delivery mechanism but generates more network traffic. Temporary [8-3-1-2-3-2] A non-confirmed (connectionless) service. A few handsets may set the type using a numeric key as follows: 9200 connectionless non-secure connection (Temporary). 9201 connection-orientated non-secure connection (Continuous). -Conn. option [8-3-1-2-4] The options are None and Secure depend on the gateway you are using. A few handsets may set the type using a numeric key as follows: 9202 connectionless secure connection. 9203 connection-orientated secure connection. ENGLISH 82 Accessing the Menu -Gateway info. [8-3-1-2-5] Almost WAP gateways do not require User ID and Password. If your gateway does’t have ones, those should be provided by your network. Also, they must be set up before browsing WAP sites. - Data setting [8-3-1-2-6] The service settings below are only available when Data has been selected as a bearer service. The value of setting is provided by network. IP address : Input the IP address of the WAP gateway you access. Dial number : Input the telephone number to dial to access your WAP gateway. Call type : Select the type of data call.: Analogue or Digital(ISDN). Call speed : The speed of your data connection. User ID : The users identity for your dial-up server (and NOT the WAP gateway). Password : The password required by your dial-up server (and NOT the WAP gateway) to identify you. ENGLISH 83 Internet [Menu 8] Accessing the Menu -Linger time [8-3-1-2-7] You need to select one of four timeout periods, after which the WAP Browser will report a failure to send data (for example because the WAP gateway is not responding). You can continue to browse WML cards in the current deck or stored in the handset cache of memory effectively ‘offline’ but when you select a link to card outside the current deck and not held in the cache you will activate a new data call. • Rename [8-3-1-3] Edit the Profile Name. • E-mail [8-3-1-4] -Connect [8-3-1-4-1] Connect to the E-mail server that you configured. -Edit address [8-3-1-4-2] Edit the E-mail address. ENGLISH 84 Accessing the Menu Cache [Menu 8-4] You can remove the contents of Cache memory or change the Cache mode. Empty cache [8-4-1] The contents of Cache memory will be removed. Cache check [8-4-2] You can change the time for checking the Cache memory. • Always [8-4-2-1] The cache is always checked whenever URL is loaded or URL is navigated. • Start only [8-4-2-2] The cache is only checked when the WAP is started. • Off [8-4-2-3] The cache is never checked. In this setting the cache can be seen as disabled. Security certf. [Menu 8-5] A list of the available certificates is shown. Profile reset [Menu 8-6] You can reset profiles to return to original settings. ENGLISH 85 On line menu Accessing the Menu If you are on line, you can view the following these menus. Go back Navigates back one page in the history list Top Jumps you back to the top of the current page Bookmarks Same to