Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
MS-3395-5/05 PRINTED IN U.S.A. Note: (This note applies only to engines used in the U.S.A.) Maintenance, replacement or repair of the emission control devices and systems may be performed /Gr'') by any nonroad engine repair establishment or individual. However, to obtain no charge repairs under the terms and provisions of the Briggs & Stratton warranty statement, any service or emission control part repair or replacement must be performed by a factory authorized dealer. Figures (Example: Fig. 1) are located on the inside front and back pages of this manual. CONTROLS & ENGINE FEATURES © Choke adjustment lever © Key switch © Primer button © Electric start button, if equipped © Handle for rope starter © Electrical cord connection for electric starter, if equipped © Sparkplug © Muffler © Electric starter 10 Engine Model / Type / Code number (stamped on engine body) Record your engine Model, Type and Code numbers here for future use. Record your date of purchase here for future use. SPECIFICATIONS Bore...................................63.5 mm (2.50 in.) Stroke .................................44.4 mm (1.75 in.) Displacement............................141 cc (8.6 cu. in.) Spark plug gap...........................0.75 mm (0.03 in.) Armature air gap.........................0.25 mm (0.010 in.) Gasoline / Oil Mix ..................Unleaded regular 87 octane mixed 50:1 with 2 cycle oil Note: Engine power will decrease 3-1/2% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F (5.6° C) above 77° F (25° C). A WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. ik WARNING Briggs & Stratton does not approve or authorize the use of these engines on All Terrain Vehicles (ATVs), fun/recreational go-karts, motor bikes, aircraft products or vehicles intended for use in competitive events. Use of these engines in such applications could result in property damage, serious injury (including paralysis), or even death. SAFETY SPECIFICATIONS Symbols and their meanings which maybe associated with this product. Ü Fire N Kickback Toxic Fumes ft Explosion Shock »jijHjftllijWM, Hot Surface A Safety Alert IL- Read \ Operator’s Manual V* & Moving Parts ITÖ1 On Off N Choke m Fuel A fPl BEFORE OPERATING ENGINE • Read entire Operating & Maintenance Instructions AND the instructions for the equipment this engine powers.* • Failure to follow instructions could result in serious injury or death. * Briggs & Stratton does not necessarily know what equipment this engine will power. For that reason, you should carefully read and understand the operating instructions for the equipment on which your engine is placed. THE OPERATING & MAINTENANCE INSTRUCTIONS CONTAIN SAFETY INFORMATION TO • Make you aware of hazards associated with engines • Inform you of the risk of injury associated with those hazards, and • Tell you how to avoid or reduce the risk of injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may be used to represent the type of hazard. DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION, when used without the alert symbol, indicates a situation that could result in damage to the engine. i ft WARNING Gasoline and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. WHEN ADDING FUEL • Turn engine OFF and let engine cool at least 2 minutes before removing gas cap. • Fill fuel tank outdoors or in well-ventilated area. • Do not overfill fuel tank. • Keep gasoline away from sparks, open flames, pilot lights, heat, and other ignition sources. • Check fuel lines, tank, cap, and fittings frequently for cracks or leaks. Replace if necessary. WHEN STARTING ENGINE • Make sure spark plug, muffler, and fuel cap are in place. • Do not crank engine with spark plug removed. • If fuel spills, wait until it evaporates before starting engine. • If engine floods, set choke to OPEN/RUN position, place throttle in FAST and crank until engine starts. WHEN OPERATING EQUIPMENT • Do not choke carburetor to stop engine. WHEN TRANSPORTING EQUIPMENT • Transport with fuel tank EMPTY. WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL IN TANK • Store away from furnaces, stoves, water heaters or other appliances that have pilot light or other ignition source because they can ignite gasoline vapors. A WARNING ft Starting engine creates sparking. Sparking can ignite nearby flammable gases. Explosion and fire could result. 1 If there is natural or LP gas leakage in area, do not start engine....
Эта инструкция также подходит к моделям:Снегоочистители - 84300 (670.77 kb)
Снегоочистители - 84100 (670.77 kb)