Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Canon CanoScan 8400F |
Фрагмент инструкции
7 The installation procedure will start. Follow the on-screen message prompts and click [Next], [Yes] or [Install] to continue the installation. If a verification dialog appears, input the Administrator’s name and password. 8 When the installation is complete, click [Yes]. The computer will restart. 9 After restarting, remove the CD-ROM from the drive and store it in a safe place. 5 Unlock the Scanning Unit Unlock the Scanning Unit • Unlock the scanning unit before connecting the scanner to the computer. If it is left locked, a malfunction or other problem may occur. • Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock. • When locking the scanner, do not lift up the back and tilt the front (scanner button location) downward. You may be unable to set the lock. 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). Lock Switch Unlock Mark 4 Return the scanner to a horizontal position. • When carrying or transporting the scanner, always lock the scanning unit by pushing the lock switch toward the lock mark ( ). 6 Connect the Scanner Connect the Scanner English • Make sure that the scanning unit is unlocked. (P. 6) 1 Attach the FAU cable to the FAU connector on the back of the scanner (..). 2 Connect the scanner to the computer with the supplied USB interface cable (..). USB Interface Cable Wide Flat Connector Small Square Connector USB Connector 3 Attach the supplied AC adapter to the scanner. 4 Press ( I ) to turn the power on. AC Adapter • Only use the USB interface cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction. • When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can operate the scanner in this condition without problems. 7 Try Scanning Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. • Make sure that the power switch is turned on. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. Alignment Mark Top Bottom Windows Macintosh 2 Select [Start], [Programs] or [All 2 Double-click the [Applications] folder Programs], [ArcSoft PhotoStudio 5.5] followed by the [PhotoStudio] folder and [PhotoStudio 5.5]. and the [PhotoStudio] icon. PhotoStudio will start. PhotoStudio will start. 8 Try Scanning 3 Click the [File] menu and choose [Select Source]. Select your scanner model name and click the [Select] button for Windows or the [OK] button for Macintosh. • After you set this setting the first time, you do not need to set it from the second time onward with the same scanner. • You will need to reset this setting if you select a different scanner or a digital camera. 4 Click the Acquire icon or click the [File] menu and select [Acquire]. ScanGear CS will start. 5 Select [Select Source]. You can select from the following options. Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document (Grayscale). 6 Click [Preview]. After calibration, the preview scan will start and gradually display the image. The image is automatically cropped at its original size. If you want to trim the image further, drag the mouse diagonally to select the area. • Do not open the document cover while a scan is in progress. 7 Select the [Destination]. You can select [Print (300 dpi)] or [Image display (150 dpi)]. When [Print (300 dpi)] is selected, the output resolution is set to 300 dpi. When [Image display (150 dpi)] is selected, it is set to 150 dpi. [Print (300 dpi)] is selected in this example. 9 English Try Scanning 8 Select the [Output Size]. You can select from the following options. • If you selected [Print (300 dpi)] in Step 7: Flexible / 4"x6" / A4 / Letter / Add/Delete • If you selected [Image display (150 dpi)] in Step 7: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 2048 x 1536 / Add/Delete With the [Flexible] option, the scan area enclosed by the dotted line (cropping frame) will be scanned at the same scale as the original. You can change the cropping frame. Other than [Flexible], you can select the 4" x 6", A4, Letter, and Add/Delete options. Expand or decrease the cropping frame to correspond to the size of the paper for printing. If you selected [Image Display (150 dpi)] in Step 7, you can select an output size in pixels to match the sizes used by computer monitors and digital cameras. 9 Click [Scan]. The final scan will start. 10Click the close box (Windows) or (Macintosh) in the ScanGear CS window to close it. The scanned image will appear in the PhotoStudio window. 11Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPEG format is recommended) and click [Save]. 12Click close box (Windows) or (Macintosh) in the PhotoStudio window to close...