Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. When 2 in 1 copying with different paper size of original, select desired copy size with COPY SIZE Key (not PAPER TRAY button of the LCD Touch Panel). 31 2-Sided/Original \ Copy N in 1 Copy ¦ N in 1 Copy Combination for N in 1 copy operation. Mode Originals Layout Operation 2 in 1 1 2 1 2 2 1 See page 31 12 1 2 2 1 1 2 121 2 2 1 4 in 1 1 2 3 4 3 4 1 2 2 4 1 3 4 3 2 1 4 2 3 1 See page 31 1234 43 21 42 31 34 12 24 13 1 2 3 4 12343 4 1 2 2 4 1 3 4 3 2 1 4 2 3 1 8 in 1 1 2 8 1234 5678 1357 2468 4321 8765 7531 8642 See page 31 12812 34 56 78 15 26 37 48 21 43 65 87 51 62 73 841 2 8 1281234 5678 1357 2468 4321 8765 7531 8642 2-Sided/Original \ Copy Booklet Copy ¦ Booklet Copy Formats output in order so document can be folded and/or saddle stitched like a book. 34 12 2 3 14 ¦ Procedure i-ADF Face-Up B4 FLS 1 (2) 3 45 Place the COPY SIZE. # Select 2-SIDED/ORIG. Number of Press Originals (Reduction/ \ \\\\\ COPY Copies START Enlargement $ Touch Booklet Mode Only) *Saddle stitch is automatically executed. (saddle &% Select Binding mode. ) ( Select Cover mode and Paper Tray. stitch finisher) NOTE . Default copy size is Reduce, copy size can be selected with 100 % or Reduce. CThe 1/2-Bin Saddle-Stitch Finisher is required for Booklet Copy. Maximum originals (images) 1-Bin Saddle-Stitch Finisher : 40 images 2-Bin Saddle-Stitch Finisher : 60 images CFor Booklet Copy, use A4 or A5 originals only. CTo reset each menu mode, touch the CANCEL button on the touch panel. CWhen using the booklet, a maximum of 60 images (40 images/1-Bin Saddle- Stitch Finisher) can be stored. Making 33 2-Sided/Original \ Copy Multi-Size Feeding Use this function when copying mixed A3/A4 size originals using the i-ADF. Original size can be detected automatically then can be copied full size (1:1) or same size. ¦ Procedure i-ADF Face-Up 1 Place the Originals B4 FLS (2) 3 4 5 COPY SIZE #Select 2-SIDED/ORIG. Number Press (Reduction/ \\\\\ COPY of Copies START $Select MULTI-SIZE FEED Enlargement Only) Function Combination of Multi-Size feeding (2) Originals Copies Full Size Reduction Enlargement A3 A4 A3 A4 A4/A4 R A4/A4 R ––– NOTE CMulti-Size Feeding function cannot be combined except SADF in another 2-sided/original \ copy function. 2-Sided/Original \ Copy SADF Mode ¦ SADF (Single Sheet Automatic Document Feeder) Function This mode adds a 5 second delay to allow another original to be placed on the i-ADF. Special originals (like thin paper, etc.) can be fed from the i-ADF Tray and copied continuously using the SADF Mode. This is useful, when copying multiple sets of originals that exceed the maximum capacity of the i-ADF Tray of 70 sheets (80 g/m2). (See the Example below) Before using this feature, the SADF Mode must be enabled in the copier function settings. (See page 67) ¦ Procedure B4 FLS i-ADF Face-Up Making 1A7 (2) 3 4 5 6 Place the Original One COPY SIZE # Select Number of Press Copy at a Time or up to 70 (Reduction/ 2-SIDED/ Copies START sheets (80 g/m2) Enlargement ORIG. \ \\\\\ Only) COPY $Select SADF Function Place the next original within 5 sec. of last ejected copy. (Continued on the next page) NOTE CSADF function cannot be combined with 2 \ \\\\\ 1 and 2 \ \\\\\ 2. (See page 59) COptional Image Memory or Hard Disk Drive may be required. 35 2-Sided/Original \ Copy SADF Mode Example: To make 5 sets of sorted copies of 100-sheet of originals. (a) Place the first 70 sheets of originals on the i-ADF Tray. (b) Touch the 2-SIDED/ORIG. \ COPY menu and select SADF. (c) Touch the SORT/FINISH menu and select the desired sorting/finishing end result. (d) Press the START key. (e) After scanning the first 70 sheets, you can place the remaining 30 sheets of originals on the i-ADF Tray within 5 second to continue copying without interrupting the cycle. Or if you do nothing the machine will display “Another original? / YES or NO”. (f) Place the remaining 30 sheets of originals on the tray and select “YES”. (g) After scanning the remaining 30 sheets, “Another original? / YES or NO” will display, select “NO” to start the printing process. 170 Originals: 70 sheets <1st scan> 10011st and 2nd Scanned Data are combined into one job. 5 sets of 100-sheet sorted copies are printed 10071 Originals: Remaining 30 sheets <2nd scan> Sort/Finish Sort/Finish Button ¦ When using Sort Mode without optional Finisher 1. Features 1 1 1 1 1 1 3 1 2 Sort Rotate-Sort Rotate-Group 2. Operation i-ADF Face-Up 1 Place the Originals Select the type of finishing mode #SORT Multiple copy sets are sorted automatically. $ROTATE-SORT* Multiple copy sets are sorted automatically and stacked in alternate direction (rotate). %ROTATE-GROUP* Multiple copies of individual pages are stacked in alternate direction (rotate). &NON-SORT Copy is stored on the tray. Making B4 FLS 3 Select Finishing Mode 4 Number of Copies 5 Press START 2 Select SORT/ FINISH mode NOTE . Rotate-Sort and Rotate-Group functions are available for A4 size only. 37 Zoom/Effects Zoom/Effects Button ¦ Initial Screen CTou...