Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
48 Chapter 2. Getting Started the BHT and System Mode If an error occurs during downloading If some error occurs during downloading, the BHT beeps three times and shows one of the following screens with the prompt "Retry?": To retry the download, press the 1 and ENT keys; to abort it, press the 2 and ENT keys. DOWNLOAD FILE. . . . . Out of memory!!. . . Retry?. 1:Yes 2:No . DOWNLOAD FILE. . . . . Too many files!!. . . Retry?. 1:Yes 2:No DOWNLOAD FILE. . . XXXXXXXX.XXX. . Communication error!!. . . . Retry?. 1:Yes 2:No ¦ Problem The memory is insufficient for storing files to be downloaded. ¦ Solution Press the 2 key to return to the SYSTEM MENU, then delete unnecessary files in the memory or decrease the size of the file to be downloaded. (Refer to Subsection 2.5.3, [ 9 ] and [ 2 ].) ¦ Problem The current download will exceed the maximum of 80 files in the memory. ¦ Solution Press the 2 key to return to the SYSTEM MENU. Delete unnecessary files in memory or decrease the number of files to be downloaded if you attempted to download more than one file. (Refer to Subsection 2.5.3, [ 9 ] and [ 2 ].) ¦ Problem Downloading has failed. ¦ Solution To retry downloading, press the 1 key. To return to the SYSTEM MENU, press the 2 key. Check the interface port, communications parameters, and communications protocol type in the . SET SYSTEM menu or perform the communications test in the TEST menu. (Refer to Subsection 2.5.3, [4.5] and [5.5].) It is also necessary to check the communications parameters setup of the host computer. 49 DOWNLOAD FILE. . . XXXXXXXX.XXX. . Program file error!!. . . Retry?. 1:Yes 2:No . ¦ Problem You attempted to download an invalid program file. ¦ Solution Check whether the program file you attempted to download is available to your BHT model. If it is not available, download the appropriate program. 50 Chapter 2. Getting Started the BHT and System Mode [ 3 ] Uploading UPLOAD. . . 1:ONE FILE. 2:ALL FILES. . 3:HT<-->HT COPY Selecting "3: UPLOAD" on the SYSTEM MENU calls up the screen shown at left. 1 ONE FILE : Uploads a user program file or data file stored in the memory. 2 ALL FILES : Uploads all user program files (object programs) and all data files stored in the memory. 3 HT<-->HT COPY : Uploads all of the files, system parameters, and calendar clock data stored in the BHT, to another BHT. This function enables copying between the BHTs. At the receiving BHT, select "2: DOWNLOAD" and "2: HT<-> HT COPY" in System Mode. For the preparation to be made preceding the start of this function, refer to NOTE given on page 46. Select a desired item by using the numerical keys or and keys, and the selected item becomes highlighted. Then press the ENT key. To return to the SYSTEM MENU, press the C key. UPLOAD FILE SAMPLE01.PD3 SAMPLE02.PD3 SAMPLE03.PD3 SAMPLE04.PD3 SAMPLE05.PD3 SAMPLE06.PD3 SAMPLE07.PD3 SAMPLE08.PD3 SAMPLE09.PD3 SAMPLE10.PD3 SAMPLE11.PD3 SAMPLE12.PD3 SAMPLE13.PD3 SAMPLE14.PD3 SAMPLE15.PD3 SAMPLE16.PD3 If you select "1:ONE FILE" on the UPLOAD menu, the file selection screen as shown at left will appear, listing all of the program files and data files stored in the memory. Select a file(s) you want to upload and press the ENT key. If you select "2:ALL FILES" or "3:HT<-->HT COPY" on the UPLOAD menu, the "ALL" or "HT<-->HT" will appear in the center of the 2nd line, respectively. 51 . Upload screens UPLOAD FILE ** Waiting ** . UPLOAD FILE ** Loading ** . UPLOAD FILE. . . SAMPLE01.PD3. . ** Loading **. . . XXXXX/YYYYY . . UPLOAD FILE ****************** * NO FILE EXISTS * ****************** If you select "1:ONE FILE" or "2:ALL FILES" on the UPLOAD menu when no files are stored in the memory, the message shown at left will appear. Pressing the C key returns to the UPLOAD menu. If you select "1:ONE FILE" and choose a file to be uploaded or if you select the "2:ALL FILES" or "3:HT<-->HT COPY" on the UPLOAD menu, then the screen shown at left will appear. If you select "2:ALL FILES" or "3:HT<-->HT COPY," the "ALL" or "HT<-->HT" will appear in the center of the 2nd line, respectively. Showing this screen, the BHT waits for a file(s) to be uploaded. Upon start of optional Ir-Transfer Utility C/Ir-Transfer Utility E/Transfer Utility or equivalent program (upon receipt of an ACK code from the host computer), the BHT displays the screen shown at left. (Refer to the "Ir-Transfer Utility C Guide"/"Ir-Transfer Utility E Guide"/"Transfer Utility Guide.") While the uploading operation is in progress, the screen shown at left is displayed indicating the file name and the number of sent records/the total number of records. To abort the uploading operation, press the C key. The screen will switch back to the UPLOAD menu. 52 Chapter 2. Getting Started the BHT and System Mode UPLOAD FILE SAMPLE01.PD3 ** Completed ** Upon completion of uploading, the number of sent records becomes equal to the total number of records and the beeper beeps once. Press the C key to return to the UPLOAD menu. If you ...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - BHT-7500W (902.54 kb)
Сканеры/копиры/мфу - BHT-7500 (902.54 kb)