Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
¦ Solution Press the C key to return to the SYSTEM MENU and delete unnecessary files. (Refer to Chapter 2, Subsection 2.5.3, [ 9 ].) 154 Chapter 4. Error Messages ¦ Problem Uploading has failed. ¦ Solution UPLOAD FILE. . . XXXXXXXX.XXX. . Communication error!!. . . Retry?. 1:Yes 2:No To retry uploading, press the 1 key. To return to the SYSTEM MENU, press the 2 key. . Check the interface port, communications parameters, and communications protocol type in the SET SYSTEM menu or perform the communications test in the TEST menu. (Refer to Chapter 2, Subsection 2.5.3, [4.5] and [5.5].) It is also necessary to check the communications parameters setup of the host computer. 155 156 This chapter describes the handling procedure of the CU-7000, the interfacing with the host computer, and the charging of the rechargeable battery cartridge. 5.1 Functions of the CU-7000 ...................................................................................... 158 5.2 Components and Functions .................................................................................. 158 5.3 Applying Power to the CU-7000 ........................................................................... 159 5.4 Communicating with the Host Computer ............................................................ 160 5.4.1 Setting the Transmission Speed of the CU-7000 ......................................... 160 5.4.2 Interface Cable Connection ............................................................................ 160 5.4.3 Interfacing with the Host Computer .............................................................. 161 5.5 Charging the Rechargeable Battery Cartridge (using the CU-7001) .................. 162 5.6 RS-232C Interface Specifications .......................................................................... 164 [ 1 ] Interface Connector and Pin Assignment ................................................. 164 [ 2 ] Interface Cable Connection ........................................................................ 165 Chapter 5 Handling the CU-7000 (Option) 157 5.1 Functions of the CU-7000 The optical communications unit CU-7000 is available in two models: CU-7001 and CU7002. The CU-7001 has both of functions (1) and (2) given below, the CU-7002 has only function (1). (1) Data exchange function The CU-7001/CU-7002 exchanges data and programs between the BHT and the host computer. It interfaces with the BHT via the optical interface and with the host computer via the RS-232C interface. (2) Battery cartridge charging function The CU-7001 charges the rechargeable battery cartridge loaded in the BHT. 5.2 Components and Functions LED indicators DATA (Communications LED, green) Lights when the BHT is communicat- ing with the host computer. POWER (Power LED, green) Lights when the power is applied to the CU-7000. Optical interface port Used to exchange data optically with the BHT. Power inlet connector RS-232C interface port Used to exchange data with the host computer. CU-7000 BHT charge terminals (Not provided on CU-7002) Do not stain these terminals; failure to protect the terminals may result in decreased charging effi- ciency.) Plug the AC adapter into this connector. 158 Chapter 5. Handling the CU-7000 (Option) 5.3 Applying Power to the CU-7000 Apply power to the CU-7000 by connecting it to the wall socket via the dedicated AC adapter according to the steps given below. Connect the outlet plug of the AC adapter to the power inlet connector of the CU-7000, then plug the other end of the AC adapter into the wall socket. AC adapter Power inlet connector • If smoke, abnormal odors or noises come from the CU, WARNING immediately unplug the AC adapter from the wall socket and contact your nearest dealer. Failure to do so could cause fire or electrical shock. • If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall socket and contact your nearest dealer. Failure to do so could cause fire or electrical shock. • If you drop the CU so as to damage its housing, immediately unplug the AC adapter from the wall socket and contact your nearest dealer. Failure to do so could cause fire or electrical shock. • Use the dedicated AC adapter only. Failure to do so could result in a fire. • Never use the CU on the line voltage other than the specified level. Doing so could cause the CU to break or burn. • If the power cord of the AC adapter is damaged (e.g., exposed or broken lead wires), stop using it and contact your nearest dealer. Failure to do so could result in a fire or electrical shock. • If you are not using the CU for a long time, be sure to CAUTION unplug the AC adapter from the wall socket for safety. Failure to do so could result in a fire. • When caring for the CU, unplug the AC adapter from the wall socket for safety. Failure to do so could result in an electrical shock. • Never cover or wrap up the CU or AC adapter in a cloth or blanket. Doing so could cause the unit to heat up inside, deform...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - BHT-7500S (902.54 kb)
Сканеры/копиры/мфу - BHT-7500 (902.54 kb)