Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
¦ This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please be away from this product and consult your doctor. CAUTION ¦ To avoid damage to the scanner, never place the scanner on an unstable or vibrating surface. The scanner may tip or fall over, causing injury. ¦ Keep all liquids, beverages, or any type of liquid, and clips, staples, necklaces, or other metal objects away from the scanner. If you accidentally spill liquid or drop a metal object into the scanner, turn OFF the power immediately and disconnect the power cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced. ¦ Never install the scanner in humid or dusty locations. Doing so may cause a fire or electrical shock. ¦ Never place heavy objects on top of the scanner, as these objects may tip or fall over, and cause injury. ¦ When you remove the power cord, grip it by the power plug head. Never attempt to disconnect the power cord from the power outlet by pulling on the power cord. Doing so may damage or expose the cord’s internal wiring, and cause a fire or electrical shock. ¦ Keep the area around the power outlet clear of all obstacles so you can disconnect the power cord easily at all times. ¦ Never spill water or volatile solutions (alcohol, benzene, paint thinner) into the scanner. Doing so may cause a fire or electrical shock. ¦ When the scanner is not being used for a long period of time, disconnect the power cord from the power outlet. ¦ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or long hair that could become entangled with moving parts, especially the rollers that feed paper into the scanner. If such objects become entangled, immediately disconnect the power plug from the power outlet to stop the scanner. ¦ Be careful when you are loading a document or clearing a paper jam. It is possible that the paper edges may cut your fingers. ¦ Do not open the Maintenance Cover while the scanner is operating. Doing so may result in a malfunction or injury. ¦ Do not touch the pins and contacts on the scanner’s connector with your hands. Doing so may result in a malfunction. 7 Disposal When disposing of this scanner, be sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner. Installation Location For operation, maintenance, and ventilation, make sure that there is enough space around the scanner. Avoid placing the scanner in the following places. It may cause a malfunction and adversely affect the scanner or your computer. . Places exposed to direct sunlight If installation in such places is unavoidable, provide a curtain or similar object to shade the scanner. . Places subject to dust and fumes Dust and cigarette fumes adversely affect the components inside the scanner. . Near running water, a heat source, water vapor, or in an area, such as a laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals . Places subject to excessive vibration and shock . Places subject to rapid changes in temperature or humidity Condensation occurring inside the scanner may impair image quality. Place the scanner in a room that is within the following range: Room temperature: 10°C to 32.5°C (50°F to 90.5°F) Relative humidity: 20% to 80% RH 20% to 50% RH when using the imprinter Use the recommended operating environment for the ink cartridge when using the imprinter. . Near electronic equipment or heavy equipment that generates a strong magnetic field, such as a speaker, TV, and radio Power Supply . Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). . Make sure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. . If you are unsure of anything relating to the power supply, contact your local authorized Canon dealer or service representative for further information. . Never place an object on top of the power cord or step on the power cord. . Never bundle the power cord or wrap the cord around an object, such as a table leg. . Do not tug on the power cord. When you remove the power cord, grip it by the power plug head. . Keep the area around the power outlet free of obstacles. . Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on your region). . Do not connect to power outlets with other electrical devices. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. . Disassembling and/or reassembling the AC adapter is extremely dangerous and should not be attempted under any circumstances. . Do not place heavy objects on the AC adapte...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - CR-50 (1.39 mb)