4. To adjust the position of the chute wheel assembly, loosen the clamp screw 2–3 turns and reposition the chute wheel assembly by sliding it backwards or forwards. 5. Retighten the clamp screw when the chute wheel assembly is repositioned. Operation of the blower vac Prior to using the blower vac, ensure you have read and understood this instruction manual. Ensure you are wearing suitable clothing and also safety equipment like safety glasses, ear protection and a mask if necessary. Ensure the

If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Fitting the collection bag 1. Connect the strap (fig A) onto the hook on the underside of the blower vacuum housing (fig B). 2. Attach the push-on plastic connector (fig C) to the outlet tube of the housing (fig D). Push the fitting of the collection bag directly onto the outlet until it “clicks” into position (fig E). 3

Your emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and the catalytic converter. Also included may be hoses, belts, and connectors and other emission related assemblies. Where a warrantable condition exists, Homelite Consumer Products, Inc. will repair your nonroad or small off-road engine at no cost to you, including diagnosis (if the diagnostic work is performed at an authorized dealer), parts, and labor. MANUFACTURER’S WARRANTY

When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS . Introduction ...................................................................................................................................................................... 2 . Important Safety Instr

If engine does not start, move choke lever to CHOKE and repeat normal starting procedure. If engine still fails to start, repeat procedure with a new spark plug. 4. Contact a servicing dealer. Turn “L” needle counterclockwise 1/16 turn. If “L” low needle can not be turned counterclockwise, do not force plastic limiter caps. Contact a servicing dealer. See Figure 14. Turn “H” needle counterclockwise 1/16 turn. If “H” high needle can not be turned counterclockwise, do not force plastic limiter cap

¦ In dusty conditions, slightly dampen surfaces when water is available. ¦ Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches and gardens. ¦ Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away. ¦ Use the full blower nozzle extension so the air stream can work close to the ground. ¦ After using blowers or other equipment, CLEAN UP! Dispose of debr

Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Homelite blower. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS ¦ ¦¦¦¦¦Introduction ...................................................................................................................................................................2 ¦ ¦¦¦¦¦General Sa

Page 2 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. ¦ ¦¦¦¦¦Do not allow children or untrained individuals to use this unit. ¦ ¦¦¦¦¦Never start or run the engine inside a closed area; breathing exhaust fumes can kill. ¦ ¦¦¦¦¦Wear eye protection which is marked to comply with ANSI Z87.1 as well as hearing protection when operating this equipment. ¦ ¦¦¦¦¦Keep all

It also does not cover any bonus items or included accessories. Only the power tool is covered under this warranty. With continuing product development, changes may have occurred which render the product received slightly different to that shown in this instruction manual. Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty. For full details of the warranty terms and conditions please refer to our website – prompt service we suggest you log your serv

Do not operate without guard(s) in place. Always disconnect the spark plug before performing maintenance or accessing any movable parts. ¦ ¦¦¦¦¦Do not point the blower nozzle in the direction of people or pets. ¦ ¦¦¦¦¦Never run the unit without the proper equipment attached. When used as a blower, always install the blower tubes. When used as a vacuum, always install the vacuum tubes and vacuum bag. Make sure the vacuum bag is completely zipped when the unit is running to avoid flying debris. ¦