Оценок - , средний балл: ( )

Инструкция по эксплуатации Craftsman, модель MAKITA BLOWER 4014NV

Производитель: Craftsman
Размер: 495.29 kb
Название файла: 4014.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

4. Do not collect still smoldering cigarette ashes or freshly cut metal shavings. Warning -Electric shock could occur if used on wet surfaces. Do not expose to rain. Store indoors. SAVE THESE INSTRUCTIONS. HOW TO USE Blowing For dust blowing, attach nozzle to blower outlet, turning clockwise to lock it in place. Dust suction For dust suction, fit nozzle onto suction inlet and dust bag onto blower outlet. After the bag fills with dust, empty the contents of the dust bag into a dust bin by releasing the fastener. Switch action Tool speed is increased by increasing pres- Speed control screw sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to Lock button stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. A speed control screw is provided so that tool speed can be changed at the fully-pulled trigger position. Turn the speed control screw clockwise (+) for higher speed, and counterclockwise (-1 for lower speed. CAUTION : Before plugging in the tool, always check to see that the trigger switch actuates properly and returns to the “OFF” position when released. MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection and maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly, Replace when they wear down to about 6 mm (1/4") or less. Keep the brushes clean and free to slip in the holders. Both brushes should be changed at the same time. Use only Makita carbon brushes. U 6mm (1/4") Loosen the screw and slide the cover plate aside. L Cover plate Use a screwdriver to remove the brush holder cap as shown in the figure. Brush holder cap / / Screwdriver -zI* Take out the worn brush, insert the new I one and secure the brush holder cap. \Carbon bizhes % TO maintain product SAFETY and RELIABILITY, repairs, any other maintenance and adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. 0 Nozzle (Longsize) Dust bag (Part No. 421223-1) (Part No. 166004-3) Nozzle (Part No. 421065-3) bug.-25-'84 US BLOWER @-ftL(LKitcL Model 4014NV Note: The switch and other part configurations may differ from country to country. MODEL 4014NV Sep.-19-'84 US 'LtM $fD DESCRIPTION MACHINE ~ 1 1 Ball Bearing 608L8 18 1 Strain Relief 2 1 Dust Sea1 8 19 1 Cord Guard 3 1 ARMATURE ASSEMBLY 20 1 CORD ASSEMBLY [With Item 1 -3 5 & 61 [With Cord Plug & Item 191 4 1 FIELD ASSEMBLY 21 4 Pan Head Screw M4x25 [With Warherl 5 1 Dust Seal 9 22 1 Motor Housing 6 1 Ball Bearing 629LLB 23 1 Switch 7 1 Fan Housing 24 2 Brush Holder Cap 8 4 Pan Head Screw M4x35 [With Washer) 25 2 Carbon Brush 9 1 Fan 110 21 1 Name Plate 10 1 Pan Head Screw M4xlZ 28 2 Rivet 0-5 11 1 Fan Cover 29 2 cover Plate 12 4 Pan Head Screw M4xl8 [With Warherl 30 2 Pan Head Screw M4x10 [With Warherl 13 1 Nozzle 31 1 sprmg PI" 14 1 Ring 32 1 Indication Label 15 2 + Hex Bolt M5x40 [With Washer) 33 1 Rubber Pin 4 16 1 Handle Cover 34 1 Rubber Pin 4 17 2-Pan Head Screw M4x18 [With Washer1 -- Note The switch and other part SpecificationS may differ from country to country P MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This Warranty does not apply where: a repairs have been made or attempted by others: a repairs are required because of normal wear and tear: a The tool has been abused, misused or improperly maintained; a alterations have been made to the tool. IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CON- SEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER APPLIES BOTH DURING AND AFTER THE TERM OF THIS WARRANTY. MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF “MERCHANTABILITY’ AND “FITNESS FOR A SPECIFIC PURPOSE.” AFTER THE ONE-YEAR TERM OF THIS WARRANTY. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exc...