Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
It utilises classic SSL Centre Section compressor design elements within a SuperAnalogue design topology. This brings the dual benefits of spectacular surround audio performance with a universally acclaimed compressor characteristic. The unit contains two separate compressors. Normally the upper one controls the left, centre, right and surround channels and the lower one the LFE channel, but the DUAL STEREO switch reassigns the controls so that the lower set control the surround channels and the upper set control left, centre, right and LFE channels. The SIDE CHAIN TRIM controls allow different thresholds to be set for left/right, centre, surround and LFE channels. The centre and surround ISO switches bypass the respective compressor channels completely. A six channel Master Fader and Autofade control provide overall level control of the mix The object of this manual is to provide purchasers of the XLogic Multichannel Compressor unit with information in the following areas: • Operation of the unit • Safety considerations • Installation requirement • Electrical connections and cabling • Connector pin-outs • Specifications and physical dimensions Warranty The warranty period for this unit is 12 months from date of purchase. In Warranty Repairs In the event of a fault during the warranty period the unit must be returned to your local distributor who will arrange for it to be shipped to Solid State Logic for repair. All units should be shipped to Solid State Logic in their original packaging. Solid State Logic can not be held responsible for any damage caused by shipping units in other packaging. In such cases Solid State Logic will return the unit in a suitable box, which you will be charged for. Please do not send manuals, power leads or any other cables - Solid State Logic can not guarantee to return them to you. Please also note that warranty returns will only be accepted as such if accompanied by a copy of the receipt or other proof of purchase. Out of Warranty Repairs In the event of a fault after the warranty period has expired, return the unit in its original packaging to your local distributor for shipment to Solid State Logic. You will be charged for the time spent on the repair (at Solid State Logic's current repair rate) plus the cost of parts and shipping. Page 3 XLogic Multichannel Compressor Owner’s Manual 2.0 Safety considerations This section contains definitions and warnings, and practical information to ensure a safe working environment. Please take time to read this section before undertaking any installation work. 2.1 Definitions ‘Maintenance’ All maintenance must be carried out by fully trained personnel. Note: it is advisable to observe suitable ESD precautions when maintenance to any part is undertaken. ‘Non-User Adjustments’ Adjustments or alterations to the equipment may affect the performance such that safety and/or international compliance standards may no longer be met. Any such adjustments must therefore only be carried out by fully trained personnel. ‘Users’ This equipment is designed for use solely by engineers and competent operators skilled in the use of professional audio equipment. ‘Environment’ This product is a Class A product intended to form an integrated component part of a professional audio recording, mixing, dubbing, film, TV, radio broadcast or similar studio wherein it will perform to specification providing that it is installed according to professional practice. 2.2 Electrical Safety Warning When installing or servicing any item of Solid State Logic equipment with power applied, when cover panels are removed, HAZARDOUS CONDITIONS CAN EXIST. These hazards include: High voltages High energy stored in capacitors High currents available from DC power busses Hot component surfaces Any metal jewellery (watches, bracelets, neck-chains and rings) that could inadvertently come into contact with uninsulated parts should always be removed before reaching inside powered equipment. 2.3 Installation Voltage Selection and Fusing All XLogic units have selectable voltage inlets. Always confirm that the input mains voltage range is set correctly before applying power. Always isolate the mains supply before changing the input range setting. If it is ever necessary to replace a blown mains fuse, then always use the correct rating and type of replacement. If a correctly rated fuse continues to blow, then a fault exists and the cause should be investigated or the unit returned to Solid State Logic for repair/replacement as appropriate. Details of mains settings and correct fuse ratings can be found in Section 3.1 and Appendix A of this manual. Safety Earth Connection Any mains powered item of Solid State Logic equipment that is supplied with a 3-core mains lead (whether connectorised or not) should always have the earth wire connected to the mains supply ground. This is the safety earth and grounds the exposed metal parts of the racks and cases and should not be removed for any reason....