Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
S Always see your authorized service dealer to replace a damaged impeller. Parts that are chipped, cracked, broken, or damaged in any other way can fly apart and cause serious injury. Replace damaged parts before using the unit. S Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit. S Never douse the unit with water or other liquids or squirt with a water hose. Clean theunitusingadampcloth.Wipe off with a clean dry cloth. See MAINTENANCE. S Check air intake openings and tubes frequently, always with the unit stopped and power source disconnected. Keep vents and tubes free of debris which can accumulate and restrict proper air flow. S Do not burn, incinerate, or expose this unit to extreme heat. S Store the unit unplugged in a high, cool, dry, indoor area out of the reach of children. S Use only recommended attachments and replacement parts to avoid creating a hazard and/or voiding warranty. S Maintain the unit according to recommended procedures. S Use only for jobs explained in the OPERATION section of this manual. BLOWER SAFETY S Use only in daylight or in good artificial light. S Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation. S Never run the unit without the proper equipment attached. When used as a blower, always install a blower tube. Use only recommended attachments. S To avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc. S Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage. S Never use for spreading chemicals, fertilizers, or any other substances which may contain toxic materials. VACUUM SAFETY S Stop the motor and disconnect the power source before opening the air inlet door or attempting to insert or remove the vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades. S Hard objects can be thrown through the collection bag or the housing and become dangerous missiles which can cause serious injury to the operator or others. S When using the vacuum attachment, the unit is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not vacuum stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid the possibility of electrical shock, do not attempt to vacuum water or other liquids. S Never run the unit without the proper equipment attached. When used as a vacuum, always install vacuum tubes and collection bag assembly. Make sure the collection bag assembly is completely zipped when unit is running to avoid flying debris. Use only recommended attachments. S Avoid situations which could set the collection bag on fire. Do not vacuum discarded matches, cigars, cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc. To avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc. S Always use the collection bag shoulder strapwhenvacuuming toavoid loss of control. S Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source disconnected. Keep vents and tubes free of debris which can accumulate and restrict proper air flow. Do not use with any opening blocked, Keep free of dust, lint, hair and anything that may reduce air flow. STANDARDS This product is listed by Underwriters Laboratories, Inc., in accordance with UL Standard 1017. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1- --800- --554- --6723. Failure to follow all Safety Rules and Precautions can result in serious injury. SAVE THESE INSTRUCTIONS 4 ASSEMBLYASSEMBLY WARNING: Stop the unit and disconnect from the power source before opening the inlet cover or attempting to insert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades. WARNING: If received assembled, ensure your unit is properly assembled and all fasteners are secure. S A standard screwdriver is required for assembly. BLOWER ASSEMBLY NOTE: Assembly instructions for using your unit as a vacuum follow this section. Attaching the blower tube If you have already assembled your unit for use as a vacuum, refer to the section HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE. To attach blower tube: 1. Align the grooves on the blower tube with the grooves on the blower outlet. 2. Push ...