Производитель: Panasonic Размер: 5.83 mb Название файла: SXKN6500.PDF Язык инструкции:

Перейти к скачиванию

(Refer to page 144) 3. Select the desired sound from the list on the display. • When you select a sound, the optimum effects for the sound are automatically applied. You can also choose to cancel this automatic feature. (Refer to page 141.) • You can use the PAGE buttons to view a different part of the list. • The sound you select is memorized for the part you selected in step 1. • The sounds that can be selected for the RIGHT 1, RIGHT 2 and LEFT parts and for PART 1-16 vary. • The illustrated display shows one example, and the actual display may be different. 4. Play the keyboard. • This instrument features INITIAL TOUCH (the volume, for example, changes depending on how hard the keyboard is played) and AFTER TOUCH (effects are added by pressing the keys harder). PjS SOUND - RIGHT I c Concert Grand 1 Electric Grand ( Ui ntage E. P. 1 ; Suitcase E. P. PIRNO :M2iE3Ba New EP Routes Modern E. P. Sh i n i ng E. P. Spinet Harpsi Strynthed Claw SOUND EXPLORER This is a convenient feature for finding the sound you want from the many available sounds. 1. Press the SOUND EXPLORER button to turn it on. • Use the buttons to the left and right of the display to select the sound. ^ SOUND - RIGHT 1 SOUND EXPLORER j=i2iE3oa I PIRNO t»?.* 1-2 Bright P i ano 132 11-1 ELECTRIC PIRNO ! 11-2 Concert Grand HRRPS1 8 CLRU1 : Pop Grand t *2, 16J-J MALLET ! [K. i&i-: P i ano Mono AC. GUITAR & HRRP | BrightPiano Mono ELECTRIC GUITRR ! Mono Grand UORLD PERC | Me11 ou Pi ano PERCUSSION I Upri ght P i ano Mel low Grand 2. Use the a and v buttons to select a GROUP of sound. 3. Use the buttons on both side of the display to select the sound. • The numerical value that is displayed for each sound is the MIDI [BANK MSB, LSBJ-PRO-GRAM CHANGE number. • GM2 sounds are selected on this display. ■ WAVE EXPANSION BOARD If the WAVE EXPANSION BOARD (sold separately) has been installed, you can select those sounds after pressing the EXP1 or EXP2 button. • Press EXP1 to select the board installed in slot 1, or EXP2 to select the board installed in slot 2. • The sound names on the sound select display and normal display are differentiated by color as follows: Built-in sounds: white EXP1 sounds: yellow EXP2 sounds: blue 33 QQTG0618 Sounds and effects Part I Sounds and effects Digital Drawbar You can play organ sounds while controlling the drawbars on the display. 1. In the PART SELECT section, select a part. 2. Press the DIGITAL DRAWBAR button to turn it on. Í ooJTAi. 1 (accwonI ^ [ HEGßTEfl I '■ o The display looks similar to the following. SOUND - RIGHT 1 ÍFRSTI TREMOLO DIGITAL DRflUBRR PERCUSSIUE TONE Itf 3. Use the balance buttons below the display to adjust the volume of each drawbar. • The volume of each drawbar is illustrated on the display and changes when you press the corresponding balance buttons to adjust the volume. • The DIGITAL DRAWBAR can not be selected for the ACCOMP and BASS parts of the COMPOSER or PERFORMANCE PADS. ■ Change the sound type Use the / button to select the type of sound. ■ PERCUSSIVE TONE PERCUSSIVE TONE adds a tone with a fast initial attack to the drawbar sounds. You can select two pitch levels of attack tones. Use the PERCUSSIVE TONE 2 2/3’ and 4’ buttons to turn the respective tone on or off. ■ TREMOLO Tremolo is a rapid oscillation in volume, like the effect of a rotating speaker. The tremolo speed can be changed while you are playing. • The SOUND DSP {ROTARY SPEAKER/ ROCK ROTARY) is used for the tremolo effect. This effect does not work if the SOUND DSP button is turned off. Use the TREMOLO button to switch between the SLOW and FAST rotating speeds. • The tremolo setting is effective for each part in common. • The types of SOUND DSP used with the TREMOLO effect are as follows: Jazz Drawbars: ROTARY SPEAKER Rock Drawbars: ROCK ROTARY • TREMOLO does not work for parts which cannot use the SOUND DSP. ■ Other settings DRAWBAR ATTACK TIME: Use the ATTACK a and v buttons to adjust the time it takes for the drawbar sound to sound after a key is played. DRAWBAR RELEASE TIME: Use the RELEASE a and v buttons to adjust the time it takes for the drawbar sound to die out after the keys are released. PERCUSSIVE TONE DECAY: Use the DECAY a and v buttons to adjust the time it takes for the percussive tone to die out. PERCUSSIVE TONE LEVEL: Use the LEVEL a and v buttons to adjust the volume of the percussive tone. • The above settings are effective for the RIGHT 1, RIGHT 2 and LEFT parts in common. • The buttons are red when they are on. 34 QQTG0618 Parti 8ounds and effects About foot marks The foot indication (for example 8’) refers to the pitch of a rank of pipes in a pipe organ. If 8’ is used as the standard (the pitch as played on the keyboard), a 16’ rank pitch will be one octave below the 8’ rank pitch, and a 4’ rank pitch one octave above. When the C3 key is pressed, the sounds of the differen...

Эта инструкция также подходит к моделям:
Синтезаторы/фортепиано - SX-KN6500 (5.83 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: