Оценок - 2, средний балл: 4.5 ( )

Производитель: Yamaha Размер: 4.18 mb Название файла: Язык инструкции:

Werckmeister/Kirnberger These scales combine Mean Tone and Pythagorean in different ways. With these scales, modulation changes the impression and feel of the songs. They were often used in the era of Bach and Beethoven. They are often used today to reproduce the music of that era on harpsichords. 1. Engage the Function mode and select . 2. Press the [+/YES] button to engage the scale function’s sub-mode, then use the [TEMPO/ FUNCTION Ў, ^] buttons to select the desired sub-mode. Press the [–/NO] and [+/YES] buttons to select the number of the desired tuning. Sub-mode F2.1: Scale Setting range: 1: Equal Temperament 2: Pure Major 3: Pure Minor 4: Pythagorean 5: Mean Tone 6: Werckmeister 7: Kirnberger Normal setting: 1: Equal Temperament F2.2: Base Note If you select a scale other than Equal Temperament, you need to specify the root. (You can specify the root note with Equal Temperament selected, but it is not effective. The base note setting is effective for tunings other than the Equal Temperament tuning.) Setting range: Normal setting: •Root indication example (F) (G) (A) followed by followed by a high bar if sharp a low bar if flat ENGLISH CLP-370/340/330, CLP-S308/S306 Owner’s Manual 63 Detailed Settings – [FUNCTION] F3.4: Voice 2 Octave Shift Setting range: –1, 0, 1 Normal setting: Different for each voice combination. You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave. F3.5: Voice 1 Effect Depth F3.6: Voice 2 Effect Depth Setting range: 0 – 20 Normal setting: Different for each voice combination. These functions make it possible to individually set the depth of the effect for Voices 1 and 2 for Dual mode. (The effect depth settings cannot be changed unless the [EFFECT] is ON. Function mode must be exited before the [EFFECT] can be turned ON.) •“Voice 1” and “Voice 2” are explained on page 26. F3.7: Reset This function resets all Dual mode functions to their default values. Press the [+/YES] button to reset the values. NOTE SHORTCUT: You can jump directly to the Dual mode functions by pressing the [TEMPO/FUNCTION] button while holding the two Dual mode voice buttons. To exit Function mode, you still need to press the [TEMPO/FUNCTION] button so that the TEMPO indicator lights up. ENGLISH F3. Dual Mode Functions You can set various parameters for Dual mode to optimize the settings for the songs you play, such as adjusting the volume balance between two voices. Dual mode function settings are set individually for each voice combination. 1. Select the voices in Dual mode, then engage the Function mode and select . 2. Press the [+/YES] button to engage the Dual mode function’s sub-mode, then use the [TEMPO/FUNCTION Ў, ^] buttons to select the desired sub-mode. Press the [–/NO] [+/ YES] button to assign values. NOTE If Dual mode is not engaged, will appear instead of and you will be unable to select Dual mode functions. In this case, you can switch to the Dual mode by selecting two voices. Sub-mode F3.1: Dual Balance Setting range: 0 – 20 (A setting of “10” produces an equal balance between the two Dual mode voices. Settings below “10” increase the volume of Voice 2 in relation to Voice 1, and settings above “10” increase the volume of Voice 1 in relation to Voice 2.) Normal setting: Different for each voice combination. You can set one voice as the main voice, and another voice as a softer, mixed voice. Setting range: -20 – 0 – 20 (With positive values, the pitch of Voice 1 is raised and the pitch of Voice 2 is lowered. With negative values, the pitch of Voice 1 is lowered and the pitch of Voice 2 is raised.) NOTE The available setting range is wider in the lower range (± 60 cents for A -1), and narrower in the higher range (± 5 cents for C7). (100 cents equal one semitone.) Normal setting: Different for each voice combination. Detune Voice 1 and Voice 2 for Dual mode to create a thicker sound. 64 CLP-370/340/330, CLP-S308/S306 Owner’s Manual Detailed Settings – [FUNCTION] F4. (CLP-370/340) Split Mode Functions This menu enables you to make various detailed settings for Split mode. By changing the split point or other setting, you can optimize the settings for the songs you play. 1. Select the voices in Split mode, then engage the Function mode and select . 2. Press the [+/YES] button to engage the Split mode function’s sub-mode, then use the [TEMPO/FUNCTION Ў, ^] buttons to select the desired sub-mode. Press the [–/NO] [+/ YES] button to assign values. NOTE If Split mode is not engaged, will appear instead of and you will be unable to select Split mode functions. Also note that you must exit Function mode before you can engage Split mode. Sub-mode F4.1: Split Point Setting range: The entire keyboard Normal setting: F2 Set the point on the keyboard that separates the right and left-hand sections (split point). The pressed key is incl...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: