Оценок - , средний балл:
(
)
)
Производитель: Korg
Размер: 288.27 kb
Название файла: Pa60EasyStart_633661830346100000.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Adding the Real-Time Parts While the STYLE will play up to eight backing parts, you can play up to four parts in real-time; three layered on the UPPER half of the keyboard, one on the LOWER portion of the keyboard. There are many advantages to having so many sounds on the upper half. For instance, a STYLE may layer a monophonic flute on top of a string section, and when you play above a certain velocity, an additional part of say, a concertina playing harmonies using the ensemble mode is introduced. This is a very powerful part of the PA-60. 1. Press the STYLE PLAY button so that the LED is lit. The Right hand column of the DISPLAY shows which sounds are currently assigned to this STYLE. A small “KEYBOARD ICON” will appear next to a voice if that part is active (turned on). The top three sounds listed in the right hand column relate to the UPPER half of the keyboard. The last Sound on this list is for the LOWER part of the keyboard. 2. Below the DISPLAY are four buttons labeled SINGLE TOUCH SETTINGS. Press one of these, and you can see the sounds assigned to the STYLE change. There are four STS (Single Touch Settings) for each STYLE. This feature (STS) allows very quick set up of sounds that correspond to the selected STYLE. 3. Try playing different STYLES and using the STS buttons to call up new sounds. Play with both hands to hear these parts. 4. To turn a part on or off, press BOTH of the VALUE/VOLUME buttons adjacent to that part on the DISPLAY. 5. To adjust the volume of a part; highlight the part by pressing the appropriate button (UPPER 1, UPPER 2, UPPER 3, LOWER 1). Pressing the left hand VOLUME/VALUE button lowers the volume of that part. Pressing the right hand VOLUME/VALUE button raises the volume of that part. 6. If you like, you can also select different sounds manually for each part. ! Make sure that the PROGRAM button to the far right of the PA-60 is lit before you continue this operation! 7. Highlight the part playing the sound you wish to change (be sure the part is active – i.e. the keyboard icon appears next to the name of the sound). Now use the PROGRAM BANK buttons to select a bank of sounds. To see more sounds inside a bank, use the PAGE+ and PAGE- buttons. Highlight the name of the new sound and play a few keys to see if this is the sound you want. If it is, press STYLE PLAY button again. The name of the new sound will appear in the DISPLAY. If not, select another sound using this same method. 8. Play the PADS! There are four PADS and a STOP PAD above the keyboard. Each one is assigned a different sound or sound effect. New and different sounds can be assigned to any PAD. Editing overview 1. The PA-60 is enormously powerful. The depth of all the possible editing is far more than can be covered here. However, to get a taste: Press the MENU button to the top left of the DISPLAY. This will enter you into the STYLE edit mode. Use the PAGE+ and PAGE – buttons to view all 25 Edit screens on the DISPLAY. 2. Here is a quick example. Start the STYLE playing by pressing the red START/STOP button. Or have a little more fun. You can also start the STYLE playing by tapping the TAP TEMPO button four times. The style will begin playing at the tempo of your tapping. 3. Press the MENU button and use the PAGE keys to go to page 20: STYCTL: DRUMS. Highlight the SNAR: DES function. Rotating the VALUE WHEEL will substitute different snares into the selected kit! (This will not work on every STYLE, but works on many) 4. Press the STYLE PLAY button to exit the EDIT page. Saving your settings 1. By now, you have a selected a STYLE you like and some SOUNDS you enjoy, and made an edit or two. All your current settings can be saved as a “PERFORMANCE” 2. Press the PERFORM button to the far right of the PA-60. 3. Press the WRITE button. 4. You can NAME your PERFORMANCE by pressing the DRUM VALUE button to the left of the DISPLAY. Use the VALUE WHEEL to select the correct letter, and use the UP / + and DOWN / – keys to move through the name. 5. Next, Press the BASS VALUE button and use the VALUE WHEEL to choose a memory location for your new PERFORMANCE. 6. Press the ENTER / YES button to save you new PERFORMANCE. The DISPLAY will ask if you are sure. If you are, press ENTER / YES. If not, press EXIT / NO Putting it all together: The Backing Sequencer Now it’s time to create a Backing Sequence: 1. Press the B.SEQ MODE button. The DISPLAY will read “New Song”. 2. Press the RECORD button (the red button to the left of the DISPLAY). 3. The DISPLAY will ask if you want to record in the REALTIME or CHORD ACCOMP mode. Highlight the REAL TIME RECORDING mode. 4. Press the big, red, START / STOP button. There will be a one bar count-off before recording begins. 5. Start Playing! 6. Press the PLAY / STOP button to end the sequencer recording. (Pressing the Start/Stop button will NOT stop the sequencer!) 7. Press PLAY / STOP button again to hear your sequence. 1. Ta – Da! You and the PA-60 have created a SONG! Other Sequence...