|
Фрагмент инструкции
12710 385. 12712 or 385. 12714 SEARS CANADA INC. Dear Customer: You have just invested in a very fine zigzag sewing machine. Before using your new Kenmore machine, please pause for a moment and carefully read this booklet which contains instructions on how to operate and care for your machine. Specific instructions are given on threading, tension adjustments, cleaning, oiling, etc. This will help you obtain the best sewing results and avoid unnecessary service expense for conditions beyond our control. Advice on the operation and care of your machine is always available at your nearest Sears Retail Store. Please remember, if you have questions about your machine or need parts and service, always mention the model number and serial number when you inquire. Kenmore Sewing Machine Record in space provided below the model number and serial number of this appliance. The model number and serial number are located on the nomenclature plate, as identified on Page 4 of this booklet. Model No. 385. Serial No Retain these numbers for future reference. THIS MODEL IS A CENTER NEEDLE, LOW BAR SEWING MACHINE. TABLE OFCONTENTS SECTION 1. KNOW THE MACHINE A Portable Case or Cabinet is Avaialble .............. 3 Locate and Identify the Parts .................. 3_4 Identify the Accessories ........................ 4 SECTION 2. PREPARE THE MACHINE FOR SEWING Set Up the Machine ......................... 5_7 • Plug in the Machine and Switch on the Power ....... S • Foot Control Use .......................... 5 • Setting Spool Pins .......................... 6 • Adjust the PresserFoot Lever .................. 6 • Thread Cutter ............................ 6 • Free Arm Sewing: the Removable Extension Table . .. 7 • AccessoriesStorage Box ' 7 • Change the PresserFoot ...................... 7 Choose the Needle and Thread ................. 7_8 • To Change the Needle ....................... 7 • Check the Needle .......................... B • Fabric, Needle, Thread and Stitch Length Chart ...... 8 Prepare the Bobbin ........................ 9_10 • To Remove the Bobbin Case from the Machine ...... 9 • Wind the Bobbin ....................... 9_10 • Insert the Bobbin into the Bobbin Case ........... 10 Prepare the Top Thread ..................... 11_12 • Thread the Needle ........................ 11 • Pick Up the Bobbin Thread .................. 12 Adjust the Top Thread Tension ................ 13_14 ReverseStitch Control ........................ 14 Stitch Selector ............................. 15 Stitch Length Control ........................ 16 Adjusting Stretch Stitch Balance ................. 16 Starting To Sew ............................ 17 SECTION 3. LEARN THE STITCHES Straight Stitches .......................... 18_22 • Straight Stitch ........................... 18 • Use the Seam Guides ....................... 18 • Turn a Square Corner ...................... 18 • Topstitching ............................ 19 • Left Needle Position ....................... 19 • Sew in a Zipper ........................ 20_21 • Use the Darning Plate ...................... 22 • Darning ............................... 22 Zigzag Stitches ........................... 23_30 • Basic Zigzag ............................. 23 • Satin Stitch ............................. 24 • Applique ............................... 25 • Bar Tacklng ............................. 25 • Sew a Button ............................ 26 • Overcasting Stitch ......................... 27 • Three-Step Zigzag ......................... 28 • LaceWork .............................. 28 • Blind Hemming .......................... 29 • Shell Stitching (Models 12712and 12714) ........ 30 • Box Stitching (Model 12714 only) .............. 30 Stretch Stitches .......................... 31 _33 • Straight Stretch .......................... 31 • Rick-Ruck Stretch ........................ 31 • Smocking .............................. 32 • Overcast Stretch Stitching ................... 32 • Serging or Pine Leaf Stretch Stitching (Models 12712 and 12714) ................... 33 • Elastic Stretch Stitch (Model 12714 only) ......... 33 Buttonholes ............................. 34_35 SECTION 4. PERFORMANCE PROBLEMS CHART What to Do When ........................ 36_37 SECTION 5. CARE FOR THE MACHINE Replacing the Light Bulb ...................... 38 Cleaning the Machine ...................... 38_39 • Clean the Feed Dogs ....................... 38 • Clean the Shuttle Race ..................... 39 Oiling the Machine .......................... 40 • Oil behind the Face Cover Plate and Under Arm Cover Plate .......................... 40 • Oil the Underside ......................... 40 PARTS LIST ........................................ 41 INDEX ............................................ 42 SECTION 1. KNOW THE MACHINE A Portable Case or Cabinet is Available Locate and Identify the Parts A full line of sewing cabinets is available at your nearest Sears retail store or through our general catalog, Another option . . . bu...
Эта инструкция также подходит к моделям:Швейные машинки - KENMORE 385. 12710 (1.3 mb)
Швейные машинки - KENMORE 385. 12714 (1.3 mb)
Швейные машинки - KENMORE 385. 12712 (1.3 mb)