Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
The GBC Shredmaster 2230S/2250X shredders are designed for small offices and low volume requirements. Innovative engineering has provided these shredders with the following operating and safety features: 1. Automatic Operation - The unit begins to operate when paper actuates the trigger in the shredder throat area. The motor stops running when the paper has cleared the cutting head and after the shredder has timed out. 2. Overload Warning - Whenever the capacity of the shredder is exceeded the unit will stop shredding and the "Reverse" icon will illuminate. 3. Bin Full - When the shred bag becomes full, the motor automatically turns off and the "Bin full" icon will illuminate. The shredder will not operate until the shredded material is either compacted or emptied. 4. Door Ajar - When the door of the shredder is not fully closed, the "Door Ajar" icon will illuminate. This is a safety feature that will only allow the shredder to operate when the cabinet door is in the closed position. Before attempting any repairs on the 2230S-1/2250X shredder, review the operating instructions first to gain experience and familiarity with its operation. You will then be better prepared to use the remaining sections of this manual to troubleshoot and repair the shredder. GBC, 2.0 2230S-1/2250X Specifications 0 Electrical Rating: 115V AC 3.4A, @ 60Hz Duty Cycle: Continuous Dimensions: HxWxD 26.75” x 16.75”x 15” (67.9 x 42.5 x 38.1 cm) Weight W/ Cabinet: 38.71 lbs. Shredding Speed: 30 FPM @ 1 sheet Shred Size: 5/32” (4mm) Throat Width: 9 1/4” (23.5cm) Capacity: 12-14 sheets of 20# Bond Paper Noise Level: 68 dB No Load Shipping Carton Dimensions: HxWxD 32.06” x 22.5” x 20” (81.4 x 57.15 x 50.8 cm) Required Electrical Service: Electrical Rating: Duty Cycle: Dimensions: HxWxD Weight W/ Cabinet: Shredding Speed: Shred Size: Throat Width: Capacity: 115V AC +/ - 10%, 60 H 2 115V AC 2.6A, @ 60Hz Continuous 26.75” x 16.75”x 15” (67.9 x 42.5 x 38.1 cm) 38.71 lbs. Iz, 15 Amp 20 FPM @ 1 sheet 5/32” X 2 5/32” (4 x 55mm) 9 1/4” (23.5cm) 8 sheets of 20# Bond Paper Noise Level: 68 dB No Load Shipping Carton Dimensions: HxWxD 32.06” x 22.5” x 20” (81.4 x 57.15 x 50.8 cm) GRC. 3.0 2230S-1/2250X Safety Instructions 0 IMPORTANT SAFETY INSTRUCTIONS Your safety as well as the safety of others is important to GBC. in this instruction manual and on the product are important safety messages. Read these messages carefully. A The safety alert symbol precedes each safety message in this instruction manual and on the product. This symbol indicates a potentiai personal safety hazard that could hurt you or others, as well as cause product or property damage. Do not connect his unit to electrical power or attempt to operate it before you have read these operating instructions. Save these instructions for later use. The following two warnings are found on the bottom of the product: Emm cM<* Do l'ai 'rilc:npl 1i> fl'-ICitf S.lKy tMorirf < *i»rrh This safety message means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage. This safety message means that you could be seriously hurt if you place your hands in the discharge shoot. The following ISO and IEC symbols appear on this product, and their meanings are as follows: I Means Power ON 0 Means OFF R Means REVRSE The symbols which become iiluminated are: | Means Power ON Means the shred bin is full. Means the cabinet door is open. Means an overload has occurred.' Depress the R side of the rocker switch This means you should be careful because long hair can become entangled in the cutting head. This could hurt you. This means don't reach into the feed opening of the cutting head. This could hurt you. This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you. This means you should be careful of loose jewelry which could become entangled in the cutting head. This could hurt you. ELECTRICAL SAFEGUARDS • Unplug your shredder before moving it, emptying the shred bag, or when it is not in use for an extended period of time. • Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner. • Do not overload electrical outlets beyond capacity as this can result in fire or electrical shock. • The socket-outlet should be installed near the equipment and shall be easily accessible. Do not alter attachmen AWARNING L'c NO I usy ujl iu jl I (kulv's ui <. I’uiivrv Cc NOT =Drcy anythirg into the 3hf=dde' Forr. çjn fii.hslarr.rfl hii otpkvavr. plug. The plug is configured for the appropriate electrical supply. 3.0/4.0 2230S-1/2250X Installation/Operation SETUP To insure proper installation and avoid injury, G8C recommends that two people set up this unit. To protect against damage, your shredder has been shipped in two parts, the shredder head A, the caPinet B. ...