Оценок - 2, средний балл: 4.5
(
)
)
|
Фото и характеристики Canon LV-7590 |
Фрагмент инструкции
1 2 Use the Point ed buttons to move the red frame pointer to the AUTO PC adj. icon and then press the OK button twice. PC ADJUST MENU Auto PC adj. To store the adjusted parameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.40). See MANUAL PC ADJUSTMENT on pages 42–43. .Note: • Fine sync, Total dots, Horizontal and Vertical position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp. 42–43.) • Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,” “720p,” “1035i,” or “1080i” is selected on the PC SYSTEM Menu. • Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed. PC Adjust Menu icon Move the red frame pointer to the Auto PC adj. and press the OK button twice. “Please wait...” appears while the Auto PC adjustment is in process. The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control unit. AUTO PC button Direct Operation Remote Control Unit Menu Operation Computer Input Computer Inpu t Move the red frame pointer to the desired item and press the OK button. PC Adjust Menu icon Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. .Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC System Menu. 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. PC ADjUST MENU 2 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the OK button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Fine sync Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Total dots Press the Point 7 8 buttons to adjust the value. Press the OK button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.” Selected ModeStatus (Stored/Free) of the Selected Mode. Use the Point 7 8buttons to adjust the number of total dots in one horizontal period to match your PC image. Position H Use the Point 7 8 buttons to adjust the horizontal picture position. Position V Use the Point 7 8 buttons to adjust the vertical picture position. Current mode Press the OK button to show H-sync freq. and V-sync freq. of the connected computer. Current mode Clamp Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Display area H Press the OK button at Current mode icon to Use the Point 7 8buttons to adjust the horizontal area displayed show the information by this projector. of the connected computer. Display area V Press the OK button at this icon to display the previous items. Use the Point 7 8buttons to adjusts the vertical area displayed by this projector. Computer Input Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data To clear the adjusted data, select Mode free and then press the OK button. Move the red arrow pointer to the Mode that you want to clear and then press the OK button. Store To store the adjusted data, select Store and then press the OK button. Move the red arrow pointer to one of the Mode 1 to 10 in which you want to store, and then press the OK button. Close this dialog box. Quit Confirmation box appears Exit the PC Adjust Menu. and then select [Yes]. To store the adjusted data This Mode has stored parameters. Vacant Close this dialog box. Values of “Total dots,” “Position H,” “Position V,” “Display area H,” and “Display area V.” Confirmation box appears and then select [Yes]. Image Level Selection Image Level Selection 1 1 Press the MENU button to display the On-Screen Menu. Use IMAGE SELECT MENU the Point 7 8buttons to move the red frame pointer to the Image Select Menu icon. 2 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the OK button. Standard Normal picture level preset on the projector. High contrast Image Select Menu icon Move the red frame pointer to the desired level and press the OK button. Picture level with improved halftone for graphics. Custom 1–10 User preset picture adjustment in the Image Adjust Me...