Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Reapply lubricant after 30 minutes of shredding or a minimum of twice per month to maintain maximum performance. Store in a cool dry place. Recycle empty bottle whenever possible or dispose of it in normal trash. Figure 1 Figure 2 Figure 3 Illustration is for reference only. 6 How to Maintain your Shredder Clearing a Jam If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam may result. The shredder will automatically stop until the jam is cleared. Move the switch to the REVERSE (REV) position, and remove the excess paper from the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING. Once the paper is cleared, normal shredding operation can resume. If the shredder jams while in reverse, press the switch to the FWD position and let shredder run to clear the jammed paper. If jam does not clear, slide the switch back and forth between the REV and FWD until the jam is cleared. If the jam cannot be cleared following this procedure, unplug the unit and carefully remove the jammed paper manually. Overheating If your shredder overheats, the unit will automatically shut off and all functions will cease in order to protect the motor. Turn off and unplug the shredder from the outlet. Allow enough time for the motor to cool down. The shredder will not resume normal function until the temperature of the motor cools down to a safe temperature. Then plug the shredder back into the outlet, turn the unit back on and resume normal operation. Make sure to empty waste basket to avoid overloading the basket and damaging the cutting mechanism. Staples and Paperclips Shredders are designed primarily to shred paper and single credit cards or CDs (as indicated). Although our shredders are safe to shred the occasional standard staple, you should remove them if possible. Also, industrial or non-standard, large size staples must be removed. Paperclips should not be shredded at any time, as they significantly reduce the life of the shredder. Please remove staples and paperclips from paper before shredding. 7 Warnings • CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper shredder in an area less accessible to children. • DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS SERIOUS INJURY MAY OCCUR. Paper shredders can pull children's fingers into the shredder mechanism. • AVOID GETTING JEWELRY, HAIR OR LOOSE CLOTHING NEAR THE FEED SLOT. If wearing a tie or long necklace, use caution to keep items away from the shredder opening. • Connect the cord to any standard 120 volt AC outlet. • RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket. • ALWAYS turn the shredder off and unplug the power cord from the AC outlet before cleaning it, moving it, or emptying the wastebasket. • NEVER place the shredder near water or any heat source. • ALWAYS keep wastebasket emptied so that the shredder's output is not impeded. • NEVER use any petroleum based or flammable oils or lubricants in or around the machine as some oils can combust causing serious injury. Lubricants specifically designed for shredders are acceptable. • NEVER spray any aerosol-based products in or around the shredder. • NEVER shred envelopes, labels or anything with glue or any sticky substance as this will lead to paper jams. • AVOID shredding paperclips. • DO NOT use the shredder if the power cord is damaged in any way. • DO NOT attempt to service this product yourself as doing so may expose you to sharp cutting blades and/or electricity and will void the manufacturer’s warranty. • NEVER let the wastebasket get full. This will lead to shredded material being pulled back up into the shredder and cause jams. 8 ...
Эта инструкция также подходит к моделям:Шредеры - DMC120D (115.99 kb)
Шредеры - DXC180D (115.99 kb)