Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
To store the adjusted parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on pages 36-37. .Note: •Fine sync, Total dots, Horizontal and Vertical position of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp. 36-37.) •Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and “480p,” “575p,” “480i,” “575i,” “720p,” “1035i,” or “1080i” is selected on the PC SYSTEM Menu. •Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed. Side Control AUTO PC ADJ button PC ADJUST MENU PC Adjust Menu icon Move the red frame pointer to the Auto PC adj. and press the SELECT button twice. “Please wait...” appears while the Auto PC adjustment is in process. Computer Input Move the red frame pointer to the desired item and press the SELECT button. PC Adjust Menu icon Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. .Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC System Menu. 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer PC ADJUST MENU to the PC Adjust Menu icon. Use the Point ed buttons to move the red frame pointer 2 to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Fine sync Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Status (Stored/Free) of the Total dots Selected Mode. Use the Point 7 8buttons to adjust the number of total dots in one horizontal period to match your PC image. Position H Use the Point 7 8 buttons to adjust the horizontal picture position. Position V Use the Point 7 8 buttons to adjust the vertical picture position. Current mode Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Press the Point 7 8 buttons to adjust the value. Press the SELECT button at this icon to adjust “Clamp,” “Display area H,” or “Display area V.” Selected Mode Clamp Current mode Use the Point 7 8buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Display area H Press the SELECT button at Current Use the Point 7 8buttons to adjust the horizontal area displayed mode icon to show by this projector. the information of the connected computer. Press the SELECT button at this icon Display area V to display the previous items. Use the Point 7 8buttons to adjust the vertical area displayed by this projector. Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All To clear the adjusted data adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Mode Close this dialog box. 1 to 10 in which you want to store, and then press the SELECT button. Confirmation box appears and then select [Yes]. Quit Exit the PC Adjust Menu. To store the adjusted data This Mode has stored parameters. Close this dialog box. Vacant Values of “Total dots,” “Position H,” “Position V,” “Display area H,” and “Display area V.” Confirmation box appears and then select [Yes]. Computer Input Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to Remote Control select the desired image level. Standard Real IMAGE SEL button Image1 Image 10 Menu Operation IMAGE SELECT MENU Press the MENU button to display the On-Screen Menu. 1 Use the Point 7 8buttons to move the red frame pointer to the Image Select Menu icon. Image Select Menu icon Use the Point ed buttons to move the red frame pointer 2 to the desired image level and then press the SELECT button. Move the red frame pointer to the desired Standard level and press the SELECT button. Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. IMAGE 1–10 User preset picture adjustment in the Image Adjust Menu. (p. 47) Computer Input Screen Size Adjustment Select the desired screen size that conform...
Эта инструкция также подходит к моделям:Телевизоры - LC-W5 (2.7 mb)