Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
15. Do not use flammable synthetic oil, petroleumbased products, or aerosols of any kind on or near shredder at any time. 2. Parts Identification 2 3 1 5 6 Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor: Current: Manufactured: R R 4 7 8 ON POWERSHRED 320 POWERSHRED 380 ON 7 8 9 2 4 3 5 Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor: Current: Manufactured: R R 6 1. LED display 5. Caution label 2. Rocker switch 6. Cabinet 3. Cover 7. Cabinet access door 4. Serial label 8. Paper feed opening 320 320C 320-2HS 380 380C 1 1. Rocker switch 6. Cabinet 2. LED display 7. Cabinet access door 3. Cover 8. Paper feed opening 4. Serial label 9. Paper guide roller 5. Caution label 320 320C 380 Paper shredder 320-2HS 380C Paper DIN 19307 SM 4a – 70 * 3. Technical Specifications Model Model Model Model Model 320 320C 320-2HS 380 380C Cutting Style High Security Strip Cut Cross Cut Cross Cut Strip Cut Cross Cut Shred Size 5/32" 7/32" 5/32" x 1 1/8" 1/25" x 1/5" 5/32" 7/32" 5/32" x 1 1/8" (3.9mm) (5.8mm) (3.9 x 30mm) (1 x 5 mm) (3.9mm) (5.8mm) (3.9 x 30mm) *Sheet capacity U.S. (75 g/m2): N/A 26 - 28 14 - 16 5 N/A 26 - 28 14 - 16 Europe (70 g/m2): 22 - 24 28 - 30 16 - 18 5 - 6 22 - 24 28 - 30 16 - 18 Speed 28 FPM 22 FPM 41 FPM 28 FPM 22 FPM (140 mm/sec) (110 mm/sec) (210 mm/sec) (140 mm/sec) (110 mm/sec) Entry width 10" 15" (255 mm) (386 mm) Motor power 120 V 60 Hz 0.9 H.P. 230 V 50 Hz 0.67 kW Voltage (Depending on country) 120 V 60 Hz 230/240 V 50 Hz Dimensions (H x W x D) 30 3/4" x 17 1/2" x 13 5/8" 34" x 21 1/4" x 16 5/8" (781 x 446 x 345 mm) (864 x 540 x 422 mm) Weight 66 lbs (30 kg) 71 lbs (32 kg) 75 lbs (34 kg) 86 lbs (39 kg) Waste container volume 19 gallons (72 liters) 30.5 gallons (115 liters) Noise level In idle 56 dB Under load 62 dB strip cuts and 70 dB cross cuts Edition 01/03 320C 380 320-2HS 380C Paper shredder 4. Supplies – Bags for cut material (Packed in dispenser carton, 50 or 100 bags to a roll depending on size. Contact Fellowes or your local Fellowes dealer for the stock number of the bag that fits your machine.) – Cutting block oil for cross-cut units Stock # 35250 5. Installation – Operate this product only from the type of power source indicated on the marking label – Install the paper shredder so that the plug is easily accessible – Shredder must be operated only in upright position – Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder a minimum distance of 4" (10 cm) to the wall or to the furniture must be maintained. 6. Caution Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result. Keep all loose articles of clothing, ties, jewelery, long hair or other loose objects away from feed opening. Injury may result. Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Serious injury may result. 7. Operation Read operating instructions before putting shredder into operation Insert plug in power outlet Install waste bag for shredded material – Open front door and completely remove bag frame from cabinet – Fold new bag around frame. Allow bag to overhang frame by approximately 7" (20 cm). – Slide frame with bag back into cabinet – Close cabinet door. Switching equipment ON 1 – Press rocker switch to pos. 1 • Switch locks in "on" position • Equipment is ready for operation (stand by) • Green LED lights – Feed paper • The shredding process is started by photo–cells in the paper feed opening. Insert paper and shredding begins automatically. • When the shredding is complete, the cutting system automatically stops after approx. 3 sec. Switching equipment OFF – Press rocker switch to pos. 3 3 • Switch resets to center position and the machine is turned off. Feeding continuous forms (model 380/380C only) – Pass the leading edge of the form under the paper guide roller (1) and into the paper feed opening (2). 2 1 Edition 01/03 320 320C 380 Paper shredder 320-2HS 380C 8. Checklist for Inoperative Machine If the equipment does not work properly, please check the following points first: – Is the plug inserted? – Is the switch turned on? – Is the cabinet door closed? – Is waste receptacle full? Empty waste bag. – Is there a paper jam in the shredder? – Is the motor overheated? Switch machine off and allow motor to cool down for approximately 15–20 min. If none of the above applies and the equipment still does not run, please contact our customer service department. 9. Malfunctions Paper jam • Press rocker switch to center position (2) 2 to stop the cutting system • Press and hold down rocker switch in pos. 3 to reverse the cutting system and 3 back out jammed material (paper is pushed out) Caution! 1 Do notattempt to force the jammed material through the machine by 3 alternating the cutting system between forward and reverse • Remove exces...
Эта инструкция также подходит к моделям:Шредеры - 320 320C (154.79 kb)