Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации ABC Office, модель 20422

Производитель: ABC Office
Размер: 297.08 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Repairs on your paper shredder should only be performed by qualified technicians. If you need service, contact your local dealer. SAFETY INSTRUCTIONS • Read the operating instructions carefully before operating your shredder! • Do not use in the vicinity of flammable liquids or gases. • Do not use in the vicinity of corrosive materials. • Do not expose to water or wet conditions. • Do not let children operate this, or any other, office equipment. • Do not reach into the cutting mechanism during operation – not even from the top or with objects. • Do not operate the shredder for a period of more than 5 minutes in no- load operation ( operation without paper) . • Keep hair clear of machine. • Keep neckties clear of machine. • Keep bracelets, or any other jewelry, clear of machine. • Power connection must be accessible at all times. • Disconnect from power supply before servicing. • The safety devices must not be disabled or removed. ON / OFF TIME: 20434: 10 MIN ON / 20 MIN OFF 20506: 5 MIN ON / 20 MIN OFF 20514: 5 MIN ON / 20 MIN OFF BEFORE YOU SHRED Remove Transport Bolts ( 6) with wrench provided. • Read all instructions carefully. • Record the Model and Serial Number in the space provided inside the front cover. • Be sure the electrical outlet provides the proper power for your shredder ( see rating label on rear of shredder) . • Install Shred Bag ( see: “ CHANGING THE SHRED BAG” ) . NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED (text) abcoffice (text) (800) 658-8788 ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME TURNING ON YOUR ON, OFF and REVERSE are controlled by the black Rocker Switch ( 3) on the top of the shredder. . Moving the switch to the “I” (ON) position places the shredder in the standby mode. Note: Shredder will run momentarily. . Moving the switch to the center or “O” (OFF) position turns the shredder off. . The REVERSE position “ R” will be discussed in “CLEARING A PAPER JAM”. SHREDDING Turn shredder on. Insert paper squarely into Feed Opening ( 1) . A light barrier ( 2) will automatically activate the shredding mechanism. Continue feeding paper into the Feed Opening until the shredding mechanism begins to draw the paper in. At this point, allow the paper to feed into the shredder on its own. Once the paper has passed completely through the shredding mechanism, the electronic controls will automatically stop the machine. Microfiche and transparencies can also be shredded in the same manner as paper, however, you should shred a piece of paper after every 8 or 10 sheets of plastic. This helps clean plastic particles out of the shredding mechanism. CAPACITY Capacity is the number of sheets of 8 .” x 11” paper that can be shredded at one time. These figures are approximate and machines may vary slightly due to various conditions. It is not recommended that you try to run your shredder at maximum capacity, as this increases the chance of a paper jam. Model 20 Lb. Bond 1...

Эта инструкция также подходит к моделям:
Шредеры - 20400 Series (297.08 kb)
Шредеры - 20404 (297.08 kb)
Шредеры - 20414 (297.08 kb)
Шредеры - 20430 (297.08 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории