Войти:
Оценок - 2, средний балл: 5 ( )

Инструкция по эксплуатации ABC Office, модель 20404

Производитель: ABC Office
Размер: 297.08 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


A cross- cut shredder should be lubricated every . hour of shredding time to maintain maximum capacity and efficiency. The procedure for lubricating your shredder is simple, and can be performed by any operator. The oil is packaged in a squeeze bottle and is applied directly to the cutting blades through the feed opening ( 3) . Run a fine stream of lubricant from one side of the feed opening to the other. Run the shredder in REVERSE for a few seconds to help distribute the lubricant evenly. You can now continue shredding as usual. DAHLE Shredder Oil is the only lubricant you should use in your paper shredder. It has been specially formulated so as not to leave any residue that could attract dust and clog the shredding mechanism. You can order DAHLE Shredder Oil ( item # 740) from your local dealer. Repairs on your paper shredder should only be performed by qualified technicians. If you need service, contact your local dealer. SAFETY INSTRUCTIONS • Read the operating instructions carefully before operating your shredder! • Do not use in the vicinity of flammable liquids or gases. • Do not use in the vicinity of corrosive materials. • Do not expose to water or wet conditions. • Do not let children operate this, or any other, office equipment. • Do not reach into the cutting mechanism during operation – not even from the top or with objects. • Do not operate the shredder for a period of more than 5 minutes in no- load operation ( operation without paper) . • Keep hair clear of machine. • Keep neckties clear of machine. • Keep bracelets, or any other jewelry, clear of machine. • Power connection must be accessible at all times. • Disconnect from power supply before servicing. • The safety devices must not be disabled or removed. ON / OFF TIME: 20434: 10 MIN ON / 20 MIN OFF 20506: 5 MIN ON / 20 MIN OFF 20514: 5 MIN ON / 20 MIN OFF BEFORE YOU SHRED Remove Transport Bolts ( 6) with wrench provided. • Read all instructions carefully. • Record the Model and Serial Number in the space provided inside the front cover. • Be sure the electrical outlet provides the proper power for your shredder ( see rating label on rear of shredder) . • Install Shred Bag ( see: “ CHANGING THE SHRED BAG” ) . NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED (text) abcoffice (text) (800) 658-8788 ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME TURNING ON YOUR ON, OFF and REVERSE are controlled by the black Rocker Switch ( 3) on the top of the shredder. . Moving the switch to the “I” (ON) position places the shredder in the standby mode. Note: Shredder will run momentarily. . Moving the switch to the center or “O” (OFF) position turns the shredder off. . The REVERSE position “ R” will be discussed in “CLEARING A PAPER JAM”. SHREDDING Turn shredder on. Insert paper squarely into Feed Opening ( 1) . A light barrier ( 2) will automatically activate the shredding mechanism. Continue feeding paper into the Feed Opening unt...

Эта инструкция также подходит к моделям:
Шредеры - 20400 Series (297.08 kb)
Шредеры - 20414 (297.08 kb)
Шредеры - 20422 (297.08 kb)
Шредеры - 20430 (297.08 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории