TV800 WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, KEY INFORMATION YOU SHOULD KNOW and personal injury, including the following READ ALL INSTRUCTIONS •Wait until grinding wheel reaches full speed before MANUAL TO REDUCE RISK OF INJURY: • Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual. applying to work. • Hold grinder at p

Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. PACKAGE CONTENTS The package contains: 1 Angle grinder 1 Side handle 1 Grinding or cutting disc 1 Flange set 1 Two-pin spanner 1 Instruction manual Carefully unpack all parts. OVERVIEW (fig. A) 1. On/off switch 2. Side handle 3. Spindle lock 4. Guard 5. Grinding or cutting disc 13 ENGLISH ASSEMBLY Before attempting any of the following operation

Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool

Features This tool includes some or all of the following features. 1. On/off switch 2. Lock-off button 3. Side handle 4. Spindle lock 5. Guard Assembly Warning! Make sure that the tool is switched off and unplugged. Fitting and removing the guard (fig. A) Fitting Place the tool on a table, with the spindle (6) facing up. Hold the guard (5) over the tool as shown. Align the holes in the adjusting plate (7) with the screw holes (8). Press the guard down and insert the screws (9) into the holes. Ti

Do not wipe them with such solvent. Wipe plastic parts with a soft cloth lightly dampened with soapy water. 25. Consult an authorized Service Agent in the event of power tool failure. 26. Use only genuine HITACHI replacement parts. 27.This tool should only be disassembled for replacement of carbon brushes. PRECAUTIONS ON USING DISC GRINDER 1. This product shall be applied to industrial use. 2. Never operate these power tools without Wheel Guards. 3. Use only grinding wheels with a “Safe Speed” a

Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean. 7. Do not immerse charger in

• Do not operate charger with damaged cord or plug — have them replaced immediately. • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to an authorized service center. • Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in risk of electric shock, electrocution or fire. • The charger is designed to operate on standard120 VAC, 60Hz household electrica

To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-54-HOW TO. FULL TWO-YEAR HOME USE WARRANTY Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a par

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals. WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the du

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement. Imported by Black & Decker (U.S.) Inc., See ‘Tools-Electric’ – Yello