Workplace safety.....................................................................................................Page 7 2. Electrical safety ........................................................................................................Page 7 3. Personal safety .........................................................................................................Page 8 4.Careful handling and use of electrical power tools..............................................Page 8 Safety a

(sDCjD RANDOM ORBITAL SANDER EXCENTERSLIBER Operation and Safety Notes Brugs- og sikkerhedsanvisninger Translation of original operation manual Overs^ttelse af den originale driftsvejledning ® Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Far du l*ser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner. GB / IE Operation and Safety Notes DK Brugs- og sikkerhedsanvisninge

J Switch the device off and allow it to come to a standstill before you put it down. J Always keep the device clean, dry and free of oil or grease. GB General safety advice/Preparing for use Q Have you understood everything? J Once you have made yourself familiar with the instructions and advice, the functioning and handling of your device, you are finally in a position to start work. Observing the manufacturer‘ s instructions and advice will maximise your safety while working with the device. Q

Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. V~ Voltage Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs.

Komperna. GmbH Burgstra.e 21 44867 Bochum (Germany) Last Information Update: 11 / 2007 · Ident.-No.: XQ 600112007-6 GB / IE / CY Operating and safety instructions Page 5 Orbital Sander XQ600 Orbital Sander Operation and Safety Notes Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. 11023478 569 11023478 569 a B C d 11 Table of Content Introduction Intended utilisation ...........................................................

■ (ID CiD BELT SANDER Operation and Safety Notes Translation of original operation manual PBS 600 Al BANDSCHLEIFER Bedienungs- und Sicherheitshinweise Originalbetriebsanleitung (dF) (GB> (AT) (JL> Сен)

To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. • Proper use The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. The device may only be used for dry sanding. Always use a sanding belt and grade of grit suitable for the particular surface you are sanding. The speed

GmbH Burgstra.e 21 D-44867 Bochum (Germany) Last Information Update 08/2007 Ident.-No.: PDS 200 A082007-6 N A B E F C D G H I K 1 2 3 5 4 6 7 8 9 11 10 12 13 14 7 2 2 M 7 L 5 7 14 2 2 33 6 5 6 O 7 N A B E F C D G H I K 1 2 3 5 4 6 7 8 9 11 10 12 13 14 7 2 2 M 7 L 5 7 14 2 2 33 6 5 6 O 7 Table of contents Introduction Proper use.....................................................................................................................................Page 6 Features and equipment.........

A worn out grinding wheel 4 needs to be replaced. This is necessary when the specified gap cannot be achieved even after readjusting the positions of the workpiece/tool rest 5 and/or the eye guard mount 2 . Preparing for first use Switching on and off The voltage must agree with that shown on the device rating plate (devices shown as 230 V can also be connected to a 220 V supply). GB/IE/CY Preparing for first use / Maintenance and cleaning Switching on j Press the ON / OFF switch 9 into the „1“

Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. e) Look after the device carefully. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poor