Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP SAS Host Bus Adapters

Производитель: HP
Размер: 258.42 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Problems Fixed in Recent Versions
Table 3 HP-UX 11i v2 September 2009 Fixes — SerialSCSI-00 B.11.23.0909
SR Number
Description
QXCR1000940381
System panic when the data cable is disconnected from an HP StorageWorks MSA60 or
MSA70 enclosure.
Table 4 HP-UX 11i v2 March 2009 Fixes — SerialSCSI-00 B.11.23.0903
SR Number
Description
QXCR1000813841
System panic during boot.
Table 5 HP-UX 11i v2 December 2008 Fixes — SerialSCSI-00 B.11.23.0812
SR Number
Description
QXCR1000876175
Delayed MCA with the USB driver on the stack.
Table 6 HP-UX 11i v2 September 2008 Fixes — SerialSCSI-00 B.11.23.0809
SR Number
Description
QXCR1000766541
System panic when Scatter/Gather elements exceed the limit.
4 Known Problems and Limitations
This section provides a list of problems and limitations known to HP when these release notes
were published. If workarounds are available, they are included.
4.1 HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller

Updating the adapter firmware to version 1.23.33 or later might change the target ID of
disk devices.

This occurs on HP Integrity rx2660, rx3600, and rx6600 servers when an Integrated RAID
volume is configured on the controller and you perform one of the following actions:
— Update the adapter firmware offline using sasflash.efi.
— Boot to an HP-UX or Ignite-UX disk containing the sasd driver from one of the following
releases, which download firmware version 1.23.33 to the adapter during boot:

B.11.23.0712

B.11.31.0712
Changing the target ID might cause physical disks, including the OS boot disk, to become
inaccessible. If some of the disks from the IR volume are inaccessible, the volume can become
degraded or fail.
NOTE:
The target ID change does not occur on systems without a RAID-1 volume. It also
does not occur on HP Integrity Bl860c servers with the HP Multiport SAS Controller.
For detailed information on how to avoid or correct this problem, see Updating Internal SAS
Controller Firmware to Version 1.23.33 Or Later
at:
http://docs.hp.com/en/netcom.html

Before replacing a failed disk, note its Device Special File (DSF) information.
If you shut down a server to replace a failed disk offline, the DSF of the failed disk is not
visible in ioscan when the server restarts. The DSF is required by the replace_tgt
command to rebuild the array with the new disk.
4


...

Эта инструкция также подходит к моделям:
Сетевое оборудование - HP-UX 11i v2 I/O Cards (258.42 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории