The electrical power is on. • Blinking green. The adapter is restarting or setting up security. • Amber. Power saving mode. • Off. There is no electrical power. Powerline LED • Solid. The adapter is connected to a Powerline network. • Blinking. The adapter is sending or receiving data. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key. The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate, indicated by the color displayed by the LED: Green: Link rate > 80 Mbps (Best) Amber: Link rate > 50 and < 80 Mbps (Better) Red: Link rate < 50 Mbps (Good) Item Description Ethernet • Solid. The Ethernet port is linked, but there is no LED activity. • Blinking. There is traffic on the Ethernet port. • Off. There is no Ethernet connection. Factory Press the Factory Reset button for 1 second, then Reset release it to turn the Powerline adapter to its factory default settings. Security After you plug in your new AV adapter, press the secu- Button rity button for 2 seconds, then press the security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes. Note: The Security button does not work in power saving mode (see “Power LED is amber” in the “Troubleshooting Tips” table below). Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Powerline LED). Pressing this button too soon can temporarily disable Powerline communication. If this should occur, use the Factory Reset button to return the Powerline adapter to its factory default settings. Recording your Password Before you install your XAV2101 adapter into your existing Powerline network, find its password, which is shown on the back of the device, and record it here: Troubleshooting Tips Power LED is off Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into anextension cord, power strip, or surge protector. Power LED is Power saving mode occurs when the Ethernet LED is off. amber This can occur when: • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within 2 seconds once the Ethernet link is up. Powerline LED is off • If you have set network security, make sure that all Power line devices are using the same encryption key; see theonline User Manual for details. • Press the Reset button on each device for 1 second to return the Powerline adapter to its factory default settings. Powerline LED is Move the Powerline device to a closer location. amber or red Ethernet LED is • Make sure that the Ethernet cables are working and not blinking securely plugged into...

Эта инструкция также подходит к моделям:
Сетевое оборудование - XAVB2101v1 (293.7 kb)