Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2. On the pop-up menu, select Turn LED off. Note: This feature is a toggle. You can turn off LEDs if they are turned on, or turn them on if they are currently turned off. A screen displays advising you that connectivity will be temporarily lost while the LEDs are being reset. Set the Powerline Encryption Key Powerline devices that share the same Powerline network have to use the same encryption key. The factory default encryption key is HomePlugAV. In locations such as apartment buildings or office buildings, others might share the same electrical power lines that you use for your Powerline network. To protect your Powerline network from unwanted access, you can customize the encryption key for your Powerline devices. Make sure that you set up exactly the same encryption key for all of your Powerline devices so that they can communicate with each other. You use the Security screen in the Powerline Utility to set encryption keys. If you customize the encryption key and then forget what it is, you can return your Powerline devices to their factory default Powerline encryption key of HomePlugAV. To set the encryption key: 1. Click the Powerline device icon or the Security icon on the Powerline Utility main screen. The top section of the Security screen shows information about each device that the Powerline Utility detects. • Device Name. This lists the Powerline devices detected on the network after the utility completes a scan for devices. The device name is initially set by the utility, but you can change it to a descriptive name such as Office or Master Bedroom. • Model. This identifies the model number of the Powerline adapter. • MAC Address. The MAC address for the Powerline device. This is also on the product label, which might not be visible when the device is plugged in. • Device Password. To change settings for a remote Powerline device you have to enter its password. The device password is located on the product label. 2. Select the check box for each device for which you want to set the encryption key. 3. In Step 2 on your screen, select the option that you want: • Create a new Encryption Key. To set your own network encryption key, type your network encryption key in the field. • Use default Encryption Key. When you click this button, the factory default encryption key automatically displays in the field. The default network encryption key is HomePlugAV. Note: Before you can reset the encryption key for a remote device, you have to enter its password. The password is printed on the product label located on the back of the adapter. 4. Click the Apply Security to Selected Devices button. When you are finished setting the encryption key, the utility displays a message indicating that the operation was successful. 5. Click OK. Reset a Device to Factory Settings This option returns the network encryption key to its factory default of HomePlugAV. Note: If you customized your network encryption key, the local Powerline device is disconnected from the network when you reset it to the factory default. To avoid this problem, reset all remote devices before you reset the local device. To reset a device to its factory settings: 1. On the Powerline Utility main screen, click the Powerline device icon. The pop-up menu displays: 2. Select Factory Reset. A message displays asking you to confirm the reset. 3. Click OK to reset the device. A message indicates whether or not the operation succeeded. Add a Device to a Powerline Network If you are adding a device to a Powerline network, and the network encryption key has been left at its default setting, all you need to do is plug the new device into a power outlet. If the network encryption key has been customized, there are two ways to set the security: • You can use the Security button to add the new device to your network. See Use the Security Button to Set the Encryption Key on page 8. • You can use the Powerline Utility to add the new device to the network, as described in the following sections. The procedure for setting the network encryption key depends on whether you use the Powerline Utility on a computer connected directly to the new Powerline adapter (local) or a different Powerline adapter (remote). To add a Powerline device from a local computer: 1. Plug the Powerline adapter into an available AC power outlet. 2. Use the provided cable to connect the Powerline device to an Ethernet port on the computer. 3. Start the Powerline Utility, click the Refresh button, and wait for the utility to detect the new device. 4. Click the device, and select Security from the drop-down list. 5. Set the encryption key for the device (see Set the Powerline Encryption Key on page 14). Verify that the devices in the Powerline network are in the device list by clicking the Refresh button. It might take a minute or two for all devices in the network to be detected. Set Up Quality of Service (QoS) The Quality of Service (QoS) feature helps you prioritize your Powerline network ...
Эта инструкция также подходит к моделям:Сетевое оборудование - XAV2101v2 (392.98 kb)
Сетевое оборудование - XAVB2101v1 (392.98 kb)
Сетевое оборудование - XAVB2101v2 (392.98 kb)