Оценок - , средний балл: ( )

Инструкция по эксплуатации 3Com, модель APSUSB2

Производитель: 3Com
Размер: 1.15 mb
Название файла: apsusb2.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

See Fig. 5.5 Workgroup: Enter the name of your workgroup Maximum Connected Stations: Set the maximum number of stations that are allowed to connect to the print server at thesame time Maximum Number of Sessions: Set the maximum number of print sessions that areallowed to print at one time Click Save to update any changes youhave made. AppleTalk Protocol: Configures the settings for AppleTalk printing. See Fig. 5.6 AppleTalk Zone: Enter the name of your zone. Printer Type: Enter your printer type PostScript Level: Select the postscript level Font Group: Select the font group Click Save to update any changes youhave made. Tools Print Test: Prints an ASCII test page fromthe Print Server to the printer. Your USBprinter must support Native DOS modeprinting. Click Test to print the test page. See Fig. 5.7 Fig. 5.5 Fig. 5.6 Fig. 5.7 Reset: Restart the Print Server. Click Yes to restart the Print Server. See Fig. 5.7 Fig. 5.7 Factory Reset: Reset all settings to factory default and restart the Print Server. The IP address of the Print Server will return to the factory default of 192.168.1. 254 Click Yes to Factory Reset and restartthe Print Server. See Fig. 5.8 Fig. 5.8 Help About: Displays the version number of thePrint Server: See Fig. 5.9 Fig. 5.9 Section 6 Section 6 Product Specifications Printer Connection Printer Interface: One USB Port (ver 1.1), Two 25-pin parallel ports Network Connection Network Interface: RJ-45 connector for 10Base-T or 100Base-TX shielded Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet Network Data Transfer Rate: 10/100 Mbps Network Protocols Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching) Transport Protocols: TCP/IP,NetBEUI,AppleTalk TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP Management and Diagnostics Standard: SNMP MIBs: MIB-II (RFC 1213) Diagnostic LED Indicators: Power, Link/Act, USB, LPT1, LPT2 Environmental and Physical Power Supply: External power supply providing 5VDC input Dimensions:193 mmx117 mmx34 mm Weight: appx. 300 g Operating Temperature: 0 degree C to 50 degree C (32 to 122 F) Storage Temperature: -25 degree C to 55 degree C (-13 to 131 F) Humidity: 5% to 95%, non-condensing Emissions: FCC Class B, CE Class B Section 7 Section 7 Technical Support E-mail: support@airlinkplus.com Toll Free: 1-888-746-3238 Web site: ...