Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The device has its own software (Wireless PC2TV InternetVue 2100 application) that allows you to control viewing options and configure predefined settings so that future connections are simple and easy. 1.2 Product Specification Hardware Overview Video Connector • DVI-I • VGA Audio Connector • 1 x 3.5mm audio jack • 2 channel stereo Network • RJ45 10/100 Mbps Ethernet • Wireless 802.11 g Power Supply • DC 5V 2A Figure 1: Hardware Description Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 1.3 Minimum System Requirements Operating System • Microsoft Windows 2000 Professional (SP4) • Windows XP Home / Professional Edition SP2 • Windows Vista Computer System • Pentium 4 or M >1.5 GHz1 • 512 MB of RAM • 802.11b/g capability (built-in or external adapter)2 • 10MB free hard drive space 1 Dual-core recommended 2 802.11g is required for full-motion video Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 Hardware Setup 2.1 Attaching InternetVue 2100 to a Television or Monitor 1. Connect a DVI or VGA cable to the appropriate DVI or VGA port on the InternetVue 2100. 2. Connect the other end of the cable to the appropriate DVI or VGA port on the television, projector or monitor. 3. To enable audio, connect a stereo cable from the television, monitor or external speakers to the stereo jack connector on the InternetVue 2100. 4. To enable access to the Internet (optional), connect a network cable to the 10/100M Ethernet port on the InternetVue 2100. 5. Connect the power supply to the power port on the InternetVue 2100. 6. After connecting power, the television or monitor to which the Internet 2100 is attached shows the PC2TV screen, This indicates that the InternetVue 2100 is connected. PC2TV-2998 Figure 2:InternetVue 2100 Splash Screen Note the screen contains a display ID. This display ID, also known as the SSID, is unique to each InternetVue 2100. The SSID is needed to connect your computer to the InternetVue 2100. Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 Software Setup 3.1 Installing Software Before you install the InternetVue 2100 software, remove any earlier version of the InternetVue 2100 software installed on the computer. See “Uninstalling Software” for removal instruction. 1. Load the CD that came with the InternetVue 2100 into the computer CD/DVD drive. The Setup program should Auto-Start (or click on PC2TVSetup.exe to start the program) 2. Select the License Agreement checkbox and click Next. 3. The software will automatically start to install. 4. Click Reboot when the installation is complete. 5. Click on , the InternetVue 2100 icon to launch the application and your computer screen should be projecting on the television, projector or computer monitor. Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 3.2 Uninstalling the Software 1. Click Start and navigate to All Programs > PC2TV 2. Click Uninstall and the software removal process will begin. 3. When the un-installation process is finished, reboot your PC. Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 InternetVue 2100 Software Application 4.1 Using the Configuration Wizard After installing InternetVue 2100 software, on the first application start, the Configuration Wizard will appear to guide you through the initial setup. The Wizard can also be selected by clicking the Wizard button in the Advance View screen. Figure 3: Configuration Wizard Welcome Screen • The wizard guides you through each configuration screen. • The Tutorial section (on the right of the screen), describes the settings available on the screen. • Click the “Next” or “Back” buttons at any time to move through the Wizard configuration screens. • Click the “Finish” button (or the “X” in the upper right corner of the screen) to end the Wizard. Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 Figure 4: Configuration Wizard Password Setup Screen • The Password (optional) restricts access to Advance and Internet Settings. Password can be up to 32 characters in length. Figure 5: Configuration Wizard Device Settings Screen Addlogix Wireless PC2TV InternetVue 2100 Version 0.2 • The Device Name (optional) allows you to use a name in place of the PC2TV’s default display ID. The Device Name can be up to 4 characters in length. Figure 6: Configuration Wizard Wireless Settings Screen • The Wireless Network settings allow you to select one of the three possible connection configurations for your PC2TV device: 1. The “Do not allow external network connections” setting means there is no connection from the PC2TV device (either wireless or Ethernet cable) to the Internet. 2. The “Connect to external networks using wired Ethernet“ setting means you have an Ethernet cable connected to your PC2TV device. 3. The “Connect to external networks using wireless“ setting means you will use the wireless access point (that you select from the list) to connect to the Internet. • The Enable Display Encryption setting (not used with the Connect to external networks using wireless setting)...