Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
The password will be what you configured. •Network Isolation Configuration: By default, all network services are enabled. However, for security, any or all listening services may be disabled. Unselect any services that you wish to disable. These changes will not take effect until the next reboot. Online Update You may configure your device server to make a connection to an update server and obtain updated software or configuration information from the server or send information to the server. FIGURE 14. Host RJ-11 IP Gateway: Online Update -top half of the page P To configure updates, first, select the update server to use and the SSL parameters for connecting to it. You may specify both the server name and the path for obtaining the updates. If the server requires HTTP authentication from the device server, specify the username and password to use. You can schedule the updates to happen periodically, or on every startup, or only when manually selected. The automatic update capability can be used along with Network Isolation to provide a way for the device server to “call out” to get updates if all the incoming connections are disabled. FIGURE 15. Host RJ-11 IP Gateway: Online Update - middle of the page You can configure which items to send to the server or update from the server. Items to send: •Product Data – manufacturing configuration data, error records •Configuration Database – current settings on the unit •System Log – trace activity Items to Upload: •Operating Software – the software running in the unit •File System – SSL certificates •Current Configuration – current settings on the unit FIGURE 16. Host RJ-11 IP Gateway: Online Update - bottom of the page •Test Configuration – check to make sure the settings are right and the server is available. This will contact the server and go through the communication necessary to send and receive the files without actually doing so. •Update Now – contacts the server and sends and updates the files now. •Save Changes – save changes for later. Status and Logs The status and log pages display system and operation information. Troubleshooting Significant events will be displayed for review. For a more complete report of events, see the system log. FIGURE 17. Host RJ-11 IP Gateway: Troubleshooting System Log By default, the device server stores informational and error messages in the system log. You can also configure the device server to record debug trace data in this system log buffer (See “Log Files and Settings” on page 35.). The log file is displayed with color-coding to make it easier to spot specific entries. You can save the System Log to a file to review separately. You can also clear the log, but there is no confirmation on clearing the stored log file. FIGURE 18. Host RJ-11 IP Gateway: System Log Port Status The current status of the RJ-11 port is displayed. FIGURE 19. Host RJ-11 IP Gateway: Port Status The DCD, RTS, CTS, DTR, DSR, and RI columns indicate the status of the modem signals for the RJ-11 (phone) port. If the modem signal is present (either asserted if it is an outgoing signal, or detected if it is an incoming signal) its name will appear in the corresponding column. The State column indicates whether the port is open, closed, waiting for DCD, or experiencing any notable conditions (such as flow control). The Serial Parameters column indicates the current settings for the port. Note: The Serial Parameters column reflect the actual, real-time serial settings in use by the port. The settings that are specified via the serial configuration pages are applied each time the port is opened. If the port is closed, the serial parameters reported by Port Status may not necessarily match the settings you configured until the port is re-opened. Furthermore, some clients (like NativeCOM) can override the configured settings. The Input, Output, Parity Errors, Framing Errors, and Overrun Errors columns are tallies of activity on the port. Under each port row is a field indicating the current TCP connection status on the port. The display will update automatically every few seconds. You can stop the automatic update by selecting “Stop” from your browser. To restart the updating, select “Refresh” or “Reload” from your browser. OS and Network Information The OS Information shows the current state of system and application tasks as well as memory usage information. The Network Information displays the status of network services and current connections. The TCP Sockets section shows current connections and TCP listeners. The UDP Listeners section shows UDP ports that are active. The Network Interfaces displays the status of the currently active interfaces on the unit. This is similar to the “ipconfig” command on a Windows machine or the “ifconfig” command on a Unix machine. The current routing table is displayed as well. Log Files and Settings This page has two parts, Enabling Logging (Log settings) and Emailing Debug information. By default, the Host RJ-11 I...
Эта инструкция также подходит к моделям:Сетевое оборудование - RJ-11 (1.75 mb)
Сетевое оборудование - RJ-11 (1.75 mb)
Сетевое оборудование - RJ-11 (1.75 mb)
Сетевое оборудование - RJ-11 (1.75 mb)