Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Protect yourself and others by observing all safety information. The Safety Instructions are contained in the General Operating Instructions. Failure to comply with the safety instructions accompanying this product could result in personal injury and/or property damage! Retain instructions for future reference. Vertical Sealless Sprayer/Washer Pumps Refer to form 1608-634-00 for General Operating and Safety Instructions and applicable Warranty. Description Vertical sealless sprayer/washer pumps are heavy duty industrial units designed for OEM, automotive and industrial washing machines, parts cleaners, spray booths and cooling towers. Pumps are immersion type; pump end must be immersed in liquid, motor must remain above liquid surface. All models feature 316 stainless steel semi-open clog resistant impeller, stainless steel shaft, steel shaft coupling, cast iron base and column, plated steel inlet screen, and a TEFC (Totally Enclosed Fan Cooled) electric motor. Motor has ball bearings. Heavy- duty steel universal mounting brackets included. Pump design eliminates a bottom bearing and a shaft seal on all models. Pumps handle liquids up to a maximum temperature of 200° F. Maximum ambient temperature 104° F. Liquid viscosity cannot exceed 100 SSU. These are manual units; no controls are supplied. For use with nonflammable liquids compatible with pump component materials. Specifications DRIVER NEMA DIS. Outlet Weight Model HP Power Supply RPM Frame (Inches)* (Lbs.) 4445-95 3 230 VAC, 60 Hz. 1-phase 3450 56C 1-. 78 4446-95 3 230 VAC, 60 Hz. 3-phase 3450 56C 1-. 73 5570-95 10 230/460 VAC, 60 Hz. 3-phase 3450 184JM 1-. 165 5571-95 7.5 230/460 VAC, 60 Hz. 3-phase 3450 184JM 1-. 150 5572-95 5 230/460 VAC, 60 Hz. 3-phase 3450 184JM 1-. 130 NOTE: Driver data is subject to change without notice, see label on driver for actual specifications. (*) Standard NPT (female) pipe thread Performance Chart GPM of Water at Total Head in Feet Max. Model HP 60 70 80 90 100 110 120 130 140 150 Head† 4445-95 3 805525-------85 ft. 4446-95 3 805525-------85 ft. 5572-95 5 * 115 100 80 50 -----110 ft. 5571-95 7.5 * * 140 125 110 90 70 40 --140 ft. 5570-95 10 * * * 162 150 135 120 95 70 40 160 ft. (*) Operation of pumps beyond range indicated will result in reduced pump life, pump damage and/or motor damage. (†) Shut-off; convert to psi, multiply by specific gravity and divide by 2.31 Installation 1. (5570 series pumps) Remove shipping fixture (Ref. No. 19) that holds the drive shaft to the base before installing pump. 2. Pump must be installed with its base supporting the entire weight of the pump. CAUTION Mounting brackets are not designed to support the pump’s weight. Brackets are designed to prevent tipping. 3. Position pump in tank or reservoir. Position mounting brackets, align pipe clearance hole with pump discharge outlet. (4445 series pumps) 4. Assemble one piece of sponge tape (Ref. No. 25) to each clamp bracket (Ref. No. 24). Attach clamp brackets to mounting bracket...
Эта инструкция также подходит к моделям:Сантехника - 4445-95 (135.26 kb)
Сантехника - 4445-95 (135.26 kb)
Сантехника - 4445-95 (135.26 kb)
Сантехника - 4445-95 (135.26 kb)