Войти:
Оценок - 5, средний балл: 3.6 ( )

Инструкция по эксплуатации Craftsman, модель SKID SPRAYER 486.24534

Производитель: Craftsman
Размер: 164.32 kb
Название файла: 80482af3-d183-47e3-be0d-2836688da5f4.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


PRINTED IN U.S.A. STORAGE ................................................................. 5 CARTON CONTENTS .............................................. 3 SAFETY RULES ....................................................... 2 REPAIR PARTSILLUSTRATION ........................... 7 ASSEMBLY ............................................................... 3 REPAIR PARTS LIST ............................................... 7 OPERATION ............................................................. 4 PARTS ORDERING/SERVICE ................. Back Page MAINTENANCE ......_................................................ 5 LIMITED ONE YEAR WARRANTY ON For one year from the date of purchase, when this sprayer is maintained and lubricated according to the operating and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of charge. If this sprayer is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty does not cover repairs necessary because of operator negligence or abuse, includingthe failure to maintain the equipment according to instructions contained in the owner's manual. WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE UNITED STATES. This warranty applies only while this product is in the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co. D/817 WA. Hoffrnan Estates, Chicago, IL 60179 The model number and serial numbers will be found on a MODEL NUMBER: 486.24534 decal attached to the sprayer tank. SERIAL NUMBER: You should record both the serial number and the date of purchase and keep in a safe place for future reference. DATE OF PURCHASE: Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • Read this owners manual carefully before attempting • Wear eye and hand protection and protective clothing to assemble or operate this sprayer. when handling and applying lawn chemicals. • Read instructions and caution notes for handling and • Do not spray on windy days. mixing of materials purchased for spraying. • Read chemical labels carefully. Become alertH Your safety Is Involved. 2 I _'_ Look for this symbol to point out important safety precautions. It mean--Attention!! CARTON CONTENTS 1. Corrosion Resistant Polyethylene Tank 2. 12 Volt Motor and 35 PSI Pump 3. 12'6" Hose with Handgun 3 1 2 FIGURE 1 CONNECTING TO BATTERY The sprayer is fully assembled at the factory. The only assembly necessary is to hook up the wiring to a 12 volt power source. The red wire of the two wire set must be connected to the positive post on the battery, or the "HOT" connection on a switch or ammeter. The brown wire may be grounded or connected to the negative battery post. plug to come in contact with positive "HOT" ,_ CAUTION: Never allow negative pin on post on battery. Fire or explosion can result. POSITIVE "HOT" PLUG POST ! NEGATIVE POST t t NEGATIVE PIN 12 VOLT TRACTOR BAI-rERY FIGURE 2 KNOW YOUR SPRAYER Read this owner's manual and safety rules before operating your sprayer. Compare the illustrate'onbelow with your sprayer to familiarize yourself with the various controls and their locations, NOZZLE_ SPRAY GUN TRIGGER \ SPRAY GUN TRIGGER Turns the flow to the nozzle on or off. BEFORE STARTING It Is Important to test the boom and spray gun with plain water before attempting actual spraying. This will enable you to check the sprayer for leaks and to adjust the spray pattern. If a leak should occur, thread tape may be used to better seal the fitting. HOW TO START YOUR SPRAYER • Once the sprayer is connected to a power source the pump will start whenever a pressure drop is caused by squeezing the spray gun trigger. A pressure switch on the pump turns the motor on when the system pressure drops below 35 psi. HOW TO STOP YOUR SPRAYER • The pump will turn of whenever a pressure buildup to 35 psi is caused by releasing the spray gun trigger. NOZZLE Adjusts the spray pattern from a fine mist to a straight stream. USING YOUR SPRAYER • The spray gun has an adjustable nozzle which allows the spray pattern to be adjusted from a cone shaped fine mist to a straight stream. • Do not subject the pump to continuous rapid on and off cycling (one second intervals) for long periods of time. This occurs when the spray gun is adjusted for a very low rate of flow. • Disconnect the sprayer from the power source to conserve energy from the battery during periods of idleness. While the resting sprayer is connected, the pump will run periodically as the system pressure gradually drops below 35 psi. • Stay clear of flowers, shrubs and evergreen trees when spraying weed control solutions. Avoid contact of the solution with these sensitive plants. and protective clo...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории