Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
• Make sure all guards, straps, deflectors, and handles are properly and securely attached. • Use only the manufacturer’s replacement line in the cutting head. Do not use any other cutting attachment. To install any other brand of replacement line or cutting head to this string trimmer can result in serious personal injury. Never use, for example, wire or wire-rope, which can break off and become a dangerous projectile. • Never operate unit without the grass deflector in place and in good condition. • Maintain a firm grip on both handles while trimming. Keep string head below waist level. Never cut with the string head located over 30 in. or more above the ground. SPECIFIC SAFETY RULES FOR bRUShCUTTER AND bLADE USE • After engine stops, keep rotating blade in thicker weeds or pulpy stalks until it stops. • Do not operate the brushcutter unless the brushcutter guard is firmly secured in place and in good condition. • Use heavy gloves when operating the brushcutter and when installing or removing blades. • Always stop the engine and remove the spark plug wire before attempting to remove any obstruction caught or jammed in the blade or before removing and installing the blade. • Do not attempt to touch or stop the blade when it is rotating. • A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating. • Replace any blade that has been damaged. Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury. • Use only the manufacturer’s replacement Tri-Arc® blade intended for use on this brushcutter. Do not use any other blade. To install any other brand blade or cutting head to this brushcutter can result in serious personal injury. • The Tri-Arc® blade is suited for cutting thicker weeds or pulpy stalks only. Do not use for any other purpose. Never use the Tri-Arc® blade to cut woody brush. • Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly “thrust” the unit away from the object that was hit. This reaction can be violent enough to cause the operator to lose control of the unit. Blade thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to occur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut from the right to the left. In the event an unexpected object or woody stock is encountered, this could minimize the blade thrust reaction. • Never cut any material over 1/2 in. diameter. • Always wear the shoulder harness when using the brush- cutter and adjust to a comfortable operating position. Maintain a firm grip on both handles while cutting with a blade. Keep the blade away from your body and below waist level. • Never use the brushcutter with the blade located 30 in. or more above the ground level. 4 — English SYMbOLS SYMbOLS Some of the following symbols may be used on this product. Please study them and learn their meaning for safe operation of this product. SYMbOL NAME EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read the Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. Eye and Hearing Protection Wear eye protection which is marked to comply with ANSI Z87.1 as well as hearing protection when operating this equipment. Keep Bystanders Away Keep all bystanders at least 50 ft. away. Ricochet Thrown objects can ricochet and result in personal injury or property damage. No Blade Do not install or use any type of blade on a product displaying this symbol. Blade Thrust Beware of blade thrust. Products authorized for blade use will display this symbol to warn of blade thrust. Gasoline and Lubricant Use unleaded gasoline intended for motor vehicle use with an octane rating of 87 [(R + M) / 2] or higher. This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMbOL SIgNAL MEANINg Indicates an imminently hazardous situation, which, if not avoided, will result DANgER: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result WARNINg: in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in CAUTION: minor or moderate injury. (Without Safety Alert Symbol) Indicates a situation that may result in property CAUTION: damage. 5 — English SYMbOLS SYMbOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest yo...
Эта инструкция также подходит к моделям:Садовые инструменты - RY26500 (6.34 mb)
Садовые инструменты - RY26901 (6.34 mb)